I want my Dana 30 Axle trussed, laminated etc by the best Axle builder welder
Can someone please point me to the right direction someone who really knows how to weld straight axles etc and laminate in Melbourne
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Looking for BEST Axle bulder or Wedler in Melbourne
Moderators: toaddog, TWISTY, V8Patrol, Moderators
You can build a truss to connect the 2 axle tubes. Commonly done in the US.bazooked wrote:dont waste your time, the centre housing is cast iron and dont bother welding anything to that as it wont work, but you can increase the tube diameter but you will be putting alot more stress on your piddly cast centre again. you will be better of upgrading diffs.
However, I wouldn't waste my time modding a D30. Would upgrade to a D44(+)/9"/toyota/nissan axle.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Agreed.ISUZUROVER wrote:You can build a truss to connect the 2 axle tubes. Commonly done in the US.bazooked wrote:dont waste your time, the centre housing is cast iron and dont bother welding anything to that as it wont work, but you can increase the tube diameter but you will be putting alot more stress on your piddly cast centre again. you will be better of upgrading diffs.
However, I wouldn't waste my time modding a D30. Would upgrade to a D44(+)/9"/toyota/nissan axle.
You are sounding like money is not of great concern, so upgrade to a stronger diff to start with, then go nuts.
Thanks Boys for the advise but i have this stupid dana 30 for Jeep JK wrangler which has all the ABS & ESP shit on these axles.
The dana 44 has the same tube diameter as Dana 30 only the pumkin is bigger
I already have ARB locker in it with chromoly shafts and arb comp diff cover
never had any experience on diff buidling so any more advise would be much appreciated who is the best in melbourne who can truss weld this stuff
The dana 44 has the same tube diameter as Dana 30 only the pumkin is bigger
I already have ARB locker in it with chromoly shafts and arb comp diff cover
never had any experience on diff buidling so any more advise would be much appreciated who is the best in melbourne who can truss weld this stuff
You can't polish a turd. You can roll it in glitter, but it will still smell like a turd. Cut your losses:
http://www.mopar.com/performance/trail/ ... index.html
These are a bolt in an will replace all your ESP/ABS stuff. They're cheap, better geared, already have lockers and bolt in.
Just my 2C.
You could try Matt from Total Traction in Moorabbin to truss your diff.
Steve.
http://www.mopar.com/performance/trail/ ... index.html
These are a bolt in an will replace all your ESP/ABS stuff. They're cheap, better geared, already have lockers and bolt in.
Just my 2C.
You could try Matt from Total Traction in Moorabbin to truss your diff.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest