Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
re-create a cool look
re-create a cool look
Hi All,
Im attempting to re-create this look on my sierra, i can see that the front bumper is a home job that dosent look to hard to recreate, and the doors are easy enough, just need to work out some handles so its legal. Does anyone know what type of / size lift may be installed? and a good match for the rims and tyres? I cant see the car from front on, but my guess is that the tyres are sticking out a fair distance from the body...
Also, im assuming the cage is custom, looks a bit weak, however, are there any glaring issues with it?
any ideas welcome,
cheers
Im attempting to re-create this look on my sierra, i can see that the front bumper is a home job that dosent look to hard to recreate, and the doors are easy enough, just need to work out some handles so its legal. Does anyone know what type of / size lift may be installed? and a good match for the rims and tyres? I cant see the car from front on, but my guess is that the tyres are sticking out a fair distance from the body...
Also, im assuming the cage is custom, looks a bit weak, however, are there any glaring issues with it?
any ideas welcome,
cheers
as long as 31 inch tyres are max, and covered, and an overall lift of no more than 6 inches you'll be fine.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
I reckon 83jack is right. The tyres look like 35's and judging by the very non standard look shackles I'd say it's sprung over YJ jeep suspension. I've seen something similar to that roll cage on the puresuzuki.com or lowrangeoffroad.com. I do admit it looks good, but it looks like a lot of work to get legal in Aus.83jack wrote:the lift looks like a spring over conversion with YJ springs front and rear? and the tyres could be 33's or 35's???
Bullshit.Gutless wrote:rims are mickey thompson. Although it is a neat looking zook, you will be hard pressed getting something that wide and tall on the road legally.
Provided the tyres are covered and you build it right it they couldn't refuse.
They're six stud wheels- so they're not suzuki diffs. If you do a diff swap correctly you can have the wheel track of the donor vehicle.
Cage can be engineered if its built right- I've had a number of six point cages passed now, they dont like them in theory- but they can still be done in an acceptable way.
There's some sort of hanger relocation going on there- so judging just by the picture , i'd guess the suspension has reasonable travel- the thing won't wont to throw itself over when it runs out of suspension like the small lift lots of cutting brigade.
The cage doesn't look weak- although taking the braces off between the targa bar and the windscreen isn't helping the windscrren strength. Personally, I'd opt for a six point, but avoid the temptation to add elleventy billion unessesary bars- it's stronger than anything else there , and why add weight which discounts the good effects of lots of weight down low(big diffs and tyres) and not much up top (ridiculous, kidding yourself exo's)
Who is online
Users browsing this forum: No registered users and 0 guests