Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearbox spacers? swb?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 108
Joined: Thu Dec 15, 2005 9:56 pm

gearbox spacers? swb?

Post by Mkdude »

i have a swb gq auto, i am fittign 3" spring lift and 2" body lift, will i need gearbox spacers? can i make them myself? do i space it down 3"s ? just under the mount with a longer bolt? anything else i need to do
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

All I did with a 4inch lift on my shorty was make spacers out of 12mm plate. Also bought longer bolts, although had to mod the crossmember due to front shaft hitting it. Thats it.
Hope this helps.
97 4x4 hilux
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: gearbox spacers? swb?

Post by bogged »

every single GQ Shorty is different. Some are fine with 4inch lift, others shake like shit with 2inch.
You will just have to wait and see..

YMMV
Posts: 108
Joined: Thu Dec 15, 2005 9:56 pm

Post by Mkdude »

do i space the mount from the chassis or auto from the mount
Posts: 103
Joined: Thu Feb 07, 2008 1:43 pm
Location: MELBOURNE

Post by ANDREWGQ 351 »

The mount from the chassis, if you were to add a spacer between the auto and the mount then the drive line angle would be bigger not smaller
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

dont worry about making a spacer.

just to to a wrecker and get a crossmember from a series 2 Gq.

should be cheap as chips as they are a throwaway item.

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest