Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suzuki Carby

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2
Joined: Fri Aug 22, 2008 1:49 pm
Location: LIVERPOOL

Suzuki Carby

Post by richie »

i have put a carby off a 96 model on my 85 but the plug for the idle is 3 pin
and the car has a single pin plug and with out this it will not idle
dose any one know how to get around this
Top
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

cut the green wire from the side switch.
the white with strip goes to earth
the black connects to the power wire from the vehicle.
from memory i think that is correct, seems backward norm black is earth but almost positive thats the way it goes
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Top
Posts: 77
Joined: Tue Jan 22, 2008 6:09 pm
Location: Newcastle

Post by suzukigav »

at the carby of the old engine where the 1 idle lead went in, unscrew the sensor thing that it connects to on the side of the carb, and swap it with the one out of the new carby... That's what i did!
Top
Posts: 2
Joined: Fri Aug 22, 2008 1:49 pm
Location: LIVERPOOL

Post by richie »

scooby_74 wrote:cut the green wire from the side switch.
the white with strip goes to earth
the black connects to the power wire from the vehicle.
from memory i think that is correct, seems backward norm black is earth but almost positive thats the way it goes
thanks scooby did it in 5 min works great thanks alot
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 16 guests