HA
I have a sierra with a 32/36 weber and extractors. Carbi ran fine for 12 months but now wont rev out. Have cleaned out carbi didnt help. Im fairly sure it is the carbi as I have changed the coil, leads, plugs, dizzy, pretty much everything bar the carbi. It revs out fine at 3/4 throttle but as soon as you put your foot flat it dies in the arse. feels like it is flooding maybe.
Im fresh out of ideas and would appreciate any help
ps just fitted a lock right, awsome in the ruff stuff.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
weber 32/36 wont rev out
So it use to run fine but now it has probs?
Did you mess with anything before it "wouldnt rev out"?
If you didnt touch anything before this happened it could only be lack of air/fuel so which one and why?
#/4 throttle would be about when the secondaries open is the secondary main jet or secondary air jet blocked?
Not being a search nazi but have you read through the "weber" threads on here there is some good tech (and alot of crap)
Another thing is the fuel supply mighten be keeping up to the carb at w.o.t. what fuel pump are you running and how do you control pressure/flow rate?
I use the bypass method and it works great for me keeps 1.5psi at carb but maximum flow to allow for when you put your foot into it.
Im running the 38 syncro though more power
Have you had the carb tuned to your engine? What jets are you running and hows the burn on the plugs?
Nik
Did you mess with anything before it "wouldnt rev out"?
If you didnt touch anything before this happened it could only be lack of air/fuel so which one and why?
#/4 throttle would be about when the secondaries open is the secondary main jet or secondary air jet blocked?
Not being a search nazi but have you read through the "weber" threads on here there is some good tech (and alot of crap)
Another thing is the fuel supply mighten be keeping up to the carb at w.o.t. what fuel pump are you running and how do you control pressure/flow rate?
I use the bypass method and it works great for me keeps 1.5psi at carb but maximum flow to allow for when you put your foot into it.
Im running the 38 syncro though more power
Have you had the carb tuned to your engine? What jets are you running and hows the burn on the plugs?
Nik
Thanks for the advice
I think the air flow is spot on. I took it out today with the air filter off and it revved out. I run the origional air filter with an adapter plate that I fabed up. I re connected it and dis connected the pipework at the base of the air filter and it still revved out ok. I didnt notice a change when I first connected it up probably becaue the redline air filter was pretty shagged.
Cheers
I think the air flow is spot on. I took it out today with the air filter off and it revved out. I run the origional air filter with an adapter plate that I fabed up. I re connected it and dis connected the pipework at the base of the air filter and it still revved out ok. I didnt notice a change when I first connected it up probably becaue the redline air filter was pretty shagged.
Cheers
Who is online
Users browsing this forum: No registered users and 5 guests