Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
shock tower raisers?
shock tower raisers?
any one know where i can get some?
The crush tube from the rear trailing arm bushes is a bout perfect if you are going to 80 series shocks. So if your rear bushes are stuffed then replace them and pull out the crush tube from the old ones. They are normally torn out anyway.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Not sure of the OZ rules but in NZ that would then require an engineers cert due to the welding. Other than that, it is a good way of doing it.chops wrote:I got hold of a 2nd set of towers and had them cut and welded (and gusseted) to my original ones to give it a somewhat 'factory' look
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Who is online
Users browsing this forum: No registered users and 3 guests