Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

power steering box and pump setup

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

power steering box and pump setup

Post by rumpig89 »

i have a power steering setup removed from a FJ45 cruiser. Was reconditionded only a few months before the vehicle was written off. I believe it is originally off a hilux?? (it says "toyota 35130") it is plumbed into a powersteering pump that i believe may be VN/VS (was used on a 253 in the FJ) all good condition!

firstly im after confirmation of what type of power steering box it is and how much the setup is probably worth?

any info appreciated

cheers
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

you need pics of it mounted.
it could be a solid axle hilux box with a modified perch
or it could be a factory fj40 box.
or it could be a 60 series type conversion that bolts to the side of the chassis

have yo ugot any pics?

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

ill get a couple tomorro. cheers
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

here are some pics of the setup.

Image

Image

Image

cheers
Posts: 243
Joined: Mon Sep 26, 2005 10:19 pm
Location: Nhill vic

Post by Rangie Thing »

Looks like a ford ea pump with a different pulley fitted, don't know about the steering box
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

hilux steering box.

looks like a solid axel job like off a ln 106. the surf ifs ones are a bit different but its hard to tell from that pic.
the solid axel pump is worth more than the ifs. 2-400 for a rebuilt one, i reckon depending on how it was rebuilt - some use a fake metal and re machine it, some re chrome which is much better and lasts much longer.

the pump has vs-nv written on it which i would think is a pretty good indicator - but i dont know from just looking at it.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 30
Joined: Tue Sep 16, 2008 11:55 am
Location: perth

Post by scottys triton »

yeah the box deff looks solid axle hilux type,
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

rumpig89 wrote:here are some pics of the setup.

Image

Image

Image

cheers
Does it have some kind of addapter between the steering box and the mount on the chassie? If not then its a stock 40 series power steering box. Basicaly the only difference in a stock 40 series box and a hilux box is the angle it bolts to the chassie mount.
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

it had to be spaced out on an angle to mount on the 45 so it must be solid axle hilux. any ideas for what its worth. might put it up for sale here or ebay.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

rumpig89 wrote:it had to be spaced out on an angle to mount on the 45 so it must be solid axle hilux. any ideas for what its worth. might put it up for sale here or ebay.
If it had the spacer than its a hilux box. I hope you kept the spacer because without it its only worth a couple of hundred at the most. If you have the spacer you may get upwards of $1000 on ebay for it- http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=015
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

looks like a hilux box,

the angle of the perch relating to the shaft angle is not cruiser.

its worth a few hundred at most. chuck it on ebay as a solid axle lux kit and try your luck.

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

cheers all.

it was just spaced out with washers so dont have a spacer.

thanks for the info.
Post Reply

Who is online

Users browsing this forum: No registered users and 135 guests