Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
454 chev in 80 series???
Moderators: toaddog, Elmo, DUDELUX
454 chev in 80 series???
thinking of putting a 454 chev in my 96 80 series has it been done before?
Can be done with no probs if you want to engineer it make sure you get the a post 96 engine as this is what the engineer will want. I have one in my 80 and have done of couple of other 80's with big blocks. 
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
"there is no replacement for displacement"taps wrote:Why the big block ?
and...
"why does a dog lick his balls?"
anyway are you lookin for a crate motor or second hand or what?
you can get after market injection if you dont want the huge injection setup.
i was gunna go for holley pro-injection and wolf 3d computer.
was gunna be around $2000.
just run it on a carby manifold of your choice.
it is real injection so they cant knock it back
http://www.holley.com/950-24S.asp
thats the full kit, you can get the 4barrel throttle body alone for $500 aus and the wolf 3d computer and wiring harness used to be about $1500
cant get any sense out of the wolf 3d site but ask a good speed shop and they will know what you want. theres probably better ones around these days but they were at the time i was lookin pretty much the best pound for pound
"there is no replacement for displacement"khany427 wrote:taps wrote:Why the big block ?
and...
"why does a dog lick his balls?"
Aaahhhhh, good answer, thanks for clearing that up khany427
YOUR 4X4 ACTION
personalized 4x4 d.v.d's
"Let us capture your action" [url=http://au.youtube.com/watch?v=QefnzCt975c][b]Click Here To View Our Video Trailer[/b][/url]
personalized 4x4 d.v.d's
"Let us capture your action" [url=http://au.youtube.com/watch?v=QefnzCt975c][b]Click Here To View Our Video Trailer[/b][/url]
Im here for the sausage!
I thought in NSW you could have an older motor as long as it was on LPG?khany427 wrote:should be fine, always best off to clear it up with the engineer first before you go spending your hard earnedTUFFAS wrote:i know it might be a stup!d question but is the injection kit legal just so when i get a engineers cert again they wont knock me back.
might be something for you to look into. unless your against LPG?
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
It would depend on the engineer with regard to how flexible he would be with the emission requirements to weather you could use the wolf computer
just because it is efi dosn't mean it will pass an emission test
normally a computer will need to have closed loop control to pass a 1996 emissions test I dont think the wolf has this fully sorted to the point of satisfying an emissions test
You would most likley need an m800 with the lamda upgrade
you need by law to be able to pass the emissions of the original year of manufacture of the engine or the car which ever is the newer of the two
if you go lpg all that goes out the door
this is why so may ac cobras etc are LPG
Or the other trick is get it complied with the dedicated LPG then convert
it to dual fuel after the dust settles but that may be illeagal but sure to get under the radar
just an idea
just because it is efi dosn't mean it will pass an emission test
normally a computer will need to have closed loop control to pass a 1996 emissions test I dont think the wolf has this fully sorted to the point of satisfying an emissions test
You would most likley need an m800 with the lamda upgrade
you need by law to be able to pass the emissions of the original year of manufacture of the engine or the car which ever is the newer of the two
if you go lpg all that goes out the door
this is why so may ac cobras etc are LPG
Or the other trick is get it complied with the dedicated LPG then convert
it to dual fuel after the dust settles but that may be illeagal but sure to get under the radar
just an idea
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
forgot about that bit!thrashlux wrote: normally a computer will need to have closed loop control to pass a 1996 emissions test I dont think the wolf has this fully sorted to the point of satisfying an emissions test
but yeah there is plenty of other aftermarket computers out there. one of them will suit!
who knows the wolf may have that side of things sorted now, i havent looked into them for a while now. theres other wolf ecu's available anyway
DO IT MATE!!! the bigger the better, just finished puting a mild carby 454 BB in a gq & well worth the effort, its been in for about a month now & no dramas yet, exept for the diff making a few clunks but you cant have it all i guess, shitloads of balls up the bush & plenty of power on the road...
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
I am guessing the ecomnomy will be about the same as the 4.5 anyway.. but at least it will have some grunt.
what does a 454 weigh ? (compared to a Yota\nissan 6)
what does a 454 weigh ? (compared to a Yota\nissan 6)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
hey mate, yeah i get around 3-3.5 klms per litre, its around 440 HP running a holley 750 DP, which i only just managed to get 4 klms per litre out of the 4.2 slug,
im not sure what it weighs but the front susspensoin sits the same as what it used to so i dont think its any heavier than the old boat ancor
im not sure what it weighs but the front susspensoin sits the same as what it used to so i dont think its any heavier than the old boat ancor
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
The ram jet efi was a marine engine and no road vehicle used this induction system, it can be purchased as a bolton coversion with ECU from GM Perfarmance thou and comes on the Ram Jet 502 ( "offroad use only" no emission control ) . The bigblocks that had factory EFI are known as a 7.4 Vortec and that was the engine i had when i first engineered and registered my 80 ute. This engine was used on the 2500 and 3500 GM pickups and in some cab chassis things they built motor homes on.Punchy wrote:yup they are called ram jets
Plenum is quite tall tho and the efi is a mess
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Silly question, YES Martin, we definately want pics!!!!!!PSI-EFI wrote:sorry for bringing a thread from the dead.. but my old man owns the 454 80 series as mentioned above from australia... if you have any questions about it or want pics feel free to ask.. cheers martin
" Some days you are the bug; some days you are the wind screen"
thanks guys... yer your right.. we kept the auto.. we just down stalled the converter because with the amount of torque, if we left the standard one it would come in at 3000 and rip the box to shreds.. the box is handling well.. under heavy load has a little flare into 3rd but goes well.. only recently with kickdown adjustment we got the tps working aswell.. lolg35me wrote:I would say he did as thats a conversion kit from the chev to the auto.raptorthumper wrote:Awesome.!
Did you keep the Toyota Auto.? How does it go.?
Who is online
Users browsing this forum: No registered users and 64 guests