Hello,
My clutch is almost all gone after my trip on the weekend.
Can anyone recommend a really good, heavy duty clutch for my Feroza that disperses heat really well (this one burnt out).
Sandy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
heavy duty clutch for feroza
Moderator: Tiny
Sure it wasn't an Applause clutch ? It all fits on to the Feroza flywheel but actually has a smaller driven plate diameter than the Feroza - so its actually has a lower torque potential than a comparable Feroza clutch.
Seen this done before, on paper it appears to be the answer, its only when you measure the parts up do you spot the difference.
Personally I found the combination a bit too sudden for my liking, a stock driven plate with the heavy duty pressure plate was more to my liking, but its a matter of preference.
And FYI i easily managed to destroy the HD clutch..... bad transfer ratios cant be solved by clutches
Seen this done before, on paper it appears to be the answer, its only when you measure the parts up do you spot the difference.
Personally I found the combination a bit too sudden for my liking, a stock driven plate with the heavy duty pressure plate was more to my liking, but its a matter of preference.
And FYI i easily managed to destroy the HD clutch..... bad transfer ratios cant be solved by clutches
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
The Exedy heavy duty clutch (the sports clutch) was the one I had in there and it was great until it burnt! I want something a bit more heavy duty that wont burn out as quickly.
I looked through the posts MM as you suggested but they all mention the Daikin clutch, but it seems Exedy has bought Daikin out.
I looked through the posts MM as you suggested but they all mention the Daikin clutch, but it seems Exedy has bought Daikin out.
A custom one would be worth looking into IMO, but your never going to overcome the transmission limitations with a clutch.
All that's going to happen is that the time taken to burn it out will get a bit longer but certainly not avoided.
Disadvantage of a custom unit is just that..... its going to take time and $$ every time you need it replaced and its not going to be as progressive in its feel as a standard system.
If you have ever driven a car with a ceramic puck clutch you'll understand that power transmission ratings come at the expense of clutch progression.
Slipping the clutch really isn't a workable long term solution IMO - custom may extend the burnouts slightly but.......
All that's going to happen is that the time taken to burn it out will get a bit longer but certainly not avoided.
Disadvantage of a custom unit is just that..... its going to take time and $$ every time you need it replaced and its not going to be as progressive in its feel as a standard system.
If you have ever driven a car with a ceramic puck clutch you'll understand that power transmission ratings come at the expense of clutch progression.
Slipping the clutch really isn't a workable long term solution IMO - custom may extend the burnouts slightly but.......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 32 guests