Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Inverted Shocks
Moderators: toaddog, Elmo, DUDELUX
Basically, you need to talk to a mechanical engineer, preferably before you do the work, they detail up some plans then send them to DOT for approval. If approved, they will send you the paperwork of approval.
If its work that been done and needs approval, i guess you go see a mechanical engineer, tell them what you have done and what material you used, they will want to look at the truck as well, they will detail up what has been done and send it away. Hopefully it will come back approved, if not, you will have to get some work done to fix it.
If its work that been done and needs approval, i guess you go see a mechanical engineer, tell them what you have done and what material you used, they will want to look at the truck as well, they will detail up what has been done and send it away. Hopefully it will come back approved, if not, you will have to get some work done to fix it.
Who is online
Users browsing this forum: No registered users and 1 guest