Hey guys. The speedo has stopped working in the Paj. I've removed the transducer and the gears look fine. I can spin it up with the ignition on and still no reading. Ive checked there's power at pin 1, good earth at pin 2 and a voltage reference at 3. I've probed the back of pin 3 and spun it up and there is an on /off voltage pattern which would indicate there is no drama with the transducer.
Has anyone had a problem with the dash cluster? All other gauges are working fine. Its a manual but is there a gearbox module/ECU that the speedo signal runs through?
Also does anyone know if the car will run, charge etc with the cluster removed?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
NJ speedo not working
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 0 guests