Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing Center Bearing

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Removing Center Bearing

Post by Weiner »

Stuffed my center bearing on my LN106 on the weekend and trying to get it off to put on the new one.

Got the back half of the tailshaft off, and am trying to remove the flange behind the bearing.

Whats the trick? is there a circlip on the nut I can't see or something?

aidan.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

there is a smal indentation on the nut where it sits on the thread, you will need to punch or bencd that back out of the keyway part before you can loosen the nut.
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 698
Joined: Sat Oct 18, 2003 6:40 pm
Location: Sydney's Outer West

bearing

Post by 82 Lux »

If all else fails use a rattle gun to undo the nut...
Custom body work by trees and rocks...

" Where's the party Officer "

Ruff Gq wrote "and i am so stupid that i don't know how it is done."
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Roctoy Designfab wrote:there is a smal indentation on the nut where it sits on the thread, you will need to punch or bencd that back out of the keyway part before you can loosen the nut.
Cheers, will have a look
82 Lux wrote:If all else fails use a rattle gun to undo the nut...
Tried with no sucess.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Got the punch out and got the tab out and it came straight off.

Where would I get a new nut from as I am not too keen to use the same one.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
User avatar
toaddog
Tickle me!
Posts: 3824
Joined: Wed Jun 23, 2004 11:25 pm

Post by toaddog »

Any of your nut and bolt shops should be able to help you otherwise toyota if you want to pay thru the nose. Just take the old one in with you.
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

toaddog wrote:Any of your nut and bolt shops should be able to help you otherwise toyota if you want to pay thru the nose. Just take the old one in with you.
No stress, thanks will try and drop in tomorrow.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

bolt shops wont be able to help you. Neither will aftermarket. tis genuine only for those bastards.

I reused the one on the lux twice now- and when the new bearing went on (bout 300kms before the chinese bearing shat the bed. Get a hardy spicer one!) the old one was about 1/4 of a turn too loose!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

using the old one is ok just so long as you can bend the locking tab in if not then get a new one.
plenty of parts on the bench
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Cheers guys, will sort something out, andmight just have to go a single peice next time
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 38 guests