I'm thinking about turbo charging my Vit, just the standard G16A carby. Anyone done it?
I can get a turbo charger, not really interested in intercooling.
Obviously need to modify exhaust manifold to to accept turbine housing.
The carby air cleaner looks like it would be a problem. To get clean air through the turbo it would need to be changed to an EFI (G16B) type intake?
Just thinking about it at the moment, any thoughts or experiences would be cool.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo Vitara
Turbo Vitara
=/_____________\=
/[__\\___S___//__]\
|-----------------------|
I--------[vitara]------I
I___I'''''''''''''''''''''I___I
/[__\\___S___//__]\
|-----------------------|
I--------[vitara]------I
I___I'''''''''''''''''''''I___I
if you dont want a intercooler, you may want to check out water / methanol injection. if you dont use something to cool the air you will not be getting the power increase you should.
also it can be tricky using carbs and turbos, there is a real knack for it. maybe try to source a su carb, these are much more turbo friendly.
just make sure you decide what you want to get out of it before you rush out and get all the rong bits.
also it can be tricky using carbs and turbos, there is a real knack for it. maybe try to source a su carb, these are much more turbo friendly.
just make sure you decide what you want to get out of it before you rush out and get all the rong bits.
'Only Cheap Wine Comes in 5 Litres'
2" springs, 2" shackles, 2" Body Lift, 31" cooper st, 2.25" exhorst, extractors, pod filter, GTI engine, microtech, bullbar.
2" springs, 2" shackles, 2" Body Lift, 31" cooper st, 2.25" exhorst, extractors, pod filter, GTI engine, microtech, bullbar.
Mate dont even attempt it unless you are completely informed and understand everything about turbocharging youre engine. A very good start is to read this book.
http://www.pitstop.net.au/view/technica ... plu/17878/
http://www.pitstop.net.au/view/technica ... plu/17878/
Cheers guys, I might read up a bit. I have a pretty good theoretical knowledge of turbocharging, and I have some practical experience with turbo diesels, but as you said, its a pretty serious modification and It would not be fun to get it wrong.
Perhaps supercharging would be a better option?
Thanks again
Perhaps supercharging would be a better option?
Thanks again
=/_____________\=
/[__\\___S___//__]\
|-----------------------|
I--------[vitara]------I
I___I'''''''''''''''''''''I___I
/[__\\___S___//__]\
|-----------------------|
I--------[vitara]------I
I___I'''''''''''''''''''''I___I
Who is online
Users browsing this forum: No registered users and 88 guests