Im sure this has been covered before and I tried searching but I couldnt seem to find what I wanted to know. On here and other forums. :(
Does a chopped down LWB cab that ends behind the front doors bolt straight onto a SWB chassis without too much drama?
My rear body mounts have torn through and I wouldnt mind a ute but I hit a tree not long ago so my front end is bent and starting to rust. :(
Im thinking I can do it in the garage over time then swap it once the mods are done and the longer cabs are easier to come by.
Thx
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LWB extra cab on SWB chassis?
LWB extra cab on SWB chassis?
SWB mav. Some mods.
Depends where it is cut. The difference between SWB and LWB cahssis's is in front of the rear wheel arch. At that point there is the extra length added and an extra body mount. So if the LWB cab still uses the extra body mount then making it fit a SWB will be a lot of work.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
how bout a chassis/wheelbase extension. Here's some pics.
http://carl.outerlimits4x4.com/ftopic110367-0-asc-0.php
http://carl.outerlimits4x4.com/ftopic110367-0-asc-0.php
Who is online
Users browsing this forum: No registered users and 2 guests