Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disk brake conversion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 96
Joined: Sun Aug 13, 2006 8:56 pm
Location: Brisbane

Disk brake conversion

Post by kond »

Does any one no if there is a kit i could buy to convert my 1999 GU ute Coil /Leaf from Drum Arse end to Disk
Cheers
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

you should be able to use normal gq/gu rear rotors, the bigger 4.8 gu rotors should also work. The rear rotors just slip onto the studs, then you need to make the caliper brackets.
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

On a GQ can you change the hub bolt on section and use the disc brake axle's and the drum center housing ?

Sorry no help to you but better than starting a new thread.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

gq drum housing is wider then disk housing and runs different axle bearing housing.

gq coil housings are an easy swap, complete housings and axles, hub to hub.

The leaf gu will need caliper mounts made, its not normally a hard job but may take a little time.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest