Well after my incident last trip i apparently need:
A Steering box
Idler Arm
Possibly tie rod ends
Can anyone help me out with these? Mainly the first two!
thanks alot
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Steering Parts
Moderator: Tiny
Steering Parts
80 Series 4.2TD:
4" Lift on 35's, F+R Air Lockers, F+R Barwork, Sliders, Warn Hi-Mount
4" Lift on 35's, F+R Air Lockers, F+R Barwork, Sliders, Warn Hi-Mount
A good second hand idler arm....... you might find that hard to get.
try http://www.outerlimits4x4.com/ftopic154569.php
try http://www.outerlimits4x4.com/ftopic154569.php
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Done MM, that thread's on page two or three now I think.
EDIT: Here it is
http://www.outerlimits4x4.com/ftopic108411.php
EDIT: Here it is
http://www.outerlimits4x4.com/ftopic108411.php
Email: parts@ripperspares.com
Just to post up "Rippers" prices
Idler arms $98.45
Ball Joints $70.40
Tie Rod Ends $69.85
Pitman Arms $88.00
I can assure you that's very good value.
Need to consider any extra cost like post etc, but I'd say that was less then half what you'd pay from Toyota spares
Idler arms $98.45
Ball Joints $70.40
Tie Rod Ends $69.85
Pitman Arms $88.00
I can assure you that's very good value.
Need to consider any extra cost like post etc, but I'd say that was less then half what you'd pay from Toyota spares
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Quick update.
I just tried to order an idler arm in for someone else and the supplier sold their last two yesterday.
More due to arrive in December. When they come in, if you think you need one you should probably get it sooner rather than later.
The good news is that idler bushes are available now. Not sure how easy they are to fit though, and no help if the ball end of your arm is worn out.
I just tried to order an idler arm in for someone else and the supplier sold their last two yesterday.
More due to arrive in December. When they come in, if you think you need one you should probably get it sooner rather than later.
The good news is that idler bushes are available now. Not sure how easy they are to fit though, and no help if the ball end of your arm is worn out.
Email: parts@ripperspares.com
Who is online
Users browsing this forum: No registered users and 22 guests