Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra Stalling Problem

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 30
Joined: Thu Jun 05, 2008 6:57 pm
Location: Brisbane

Sierra Stalling Problem

Post by greenzook89 »

I had a look in the bible but didnt really find anything really useful... Heres my problem. My Zook likes to stall, Gets down to around 1000rpm and just cuts out. i adjusted the throttle cable to bring the revs up to around 1500rpm, sometimes it works but it will still stall occasionally, even when it idles it seems really rough and almost like its running out of fuel. I pulled the plugs out and they were really white, Seems to me that its running too lean. What do I look for?

Its a G13 sierra motor in a NT Drover
Posts: 47
Joined: Fri Oct 13, 2006 9:25 pm
Location: willetton perth

Post by 83jack »

try pulling the idle soleniod out of the carby and blowing compressed air into the carby.
cheers
simon
Posts: 27
Joined: Tue Aug 19, 2008 9:14 am
Location: Newcastle

Post by dxkrazed »

this same problem happened with my mates sierra today when we were out 4wding.
We were going along fine when his car just kept stalling every time he slowed down or stopped.
He knows jack all about cars so i hopped in and had a look, i also noticed a problem when you get up to around 3000-4000 revs the engine makes horrible noises, then once you break the 4000 line the noise stops and it sounds fine.

But all in all Vitara > Sierra
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Pull your idle solenoid and blow out hte carby, then pull one of the jet access bolts and blow through that as well. Fit a second fuel filter between the pump and the carby inlet.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 5
Joined: Fri Oct 17, 2008 7:31 pm
Location: Perth

Post by Cade »

i had the same issue but just had a carby rebuild oh its PURFECT now
Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests