Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Larger tyres and speedo differences

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Larger tyres and speedo differences

Post by Wozza244 »

There is prob a thread on here about this but i cant find it, does anyone have a table or formula of how much your speedo goes out per inch bigger your tyres are, for example i hav 35's and 37's but the speedo was right when it had 31's on it if ya get wat i mean.
Cheers
Get out there!!
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

Have emailed you one.
Don't know how to post it up here as it is a Excel program
Ben
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

It is quite simple.

Just work out the circumference of your existing tyre: Diameter x PI So for a 31" tyre it would be 31*3.14 = 97.4 (33" = 103.7 and 35" = 110).

work out the % increase. e.g. 31" to 33" = (103.7 - 97.4) / 97.4 *100 = 6.5%

31-35 is 13%

So if your speedo is 100% accurate with 31's, you would be doing 113 km/h on 35's when your speeds is on 100.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 216
Joined: Sat May 17, 2008 11:46 pm
Location: Melton Sth, vic

Post by dklyne454 »

That's all good........ as long as your tire is the size that is indicated. there is a lot of variance in stated size, and actual size.

Best bet,
Wrap a tape around your tyre to get the circumfrence and a more accurate measure.

as isuzurover said.

Circ / pi = diameter.

2760mm / 3.14 = 878.98 (mm x 0.39 = inches eg. 878.98 x .39 = 34.28 inches)

Now work out your difference between the 2 tires





or

borrow a GPS and get an accurate reading of what your new tires are at.
92' Mav. seat covers, air freshner, floor mats, half eaten sandwich..........
http://www.outerlimits4x4.com/ftopic147700.php
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

Get a mate who has standard tyres and an accurate speedo and have him drive at 100km/h and just follow him and see what your speedo reads.. to get a rough idea just how much bigger your tires are. say 10% and add 10% to your speed and thats what you will be doing. ie 100 = 110

hope this helps
Tomo
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

when I had my 29' and went to 33 it has gone up 10km/h spot on.
LETS GO BRONCOS
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

10kph at 50?
or 10 kph at 100?
percentages work so much better than a kph difference

id go off what the tyre says it is, theyre gonna be a little smaller than they state normally, so then u drive just under the limits.
keeps you safe :)
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 1
Joined: Sat Sep 20, 2008 7:53 am
Location: south east qld

Post by kruzen84 »

http://www.miata.net/garage/tirecalc.html

this should help ... as a guide only i would think.
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

love ke70 wrote:10kph at 50?
or 10 kph at 100?
percentages work so much better than a kph difference

id go off what the tyre says it is, theyre gonna be a little smaller than they state normally, so then u drive just under the limits.
keeps you safe :)
the diffrence is constance it is 10 kph
LETS GO BRONCOS
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

frp88 wrote:
love ke70 wrote:10kph at 50?
or 10 kph at 100?
percentages work so much better than a kph difference

id go off what the tyre says it is, theyre gonna be a little smaller than they state normally, so then u drive just under the limits.
keeps you safe :)
the diffrence is constance it is 10 kph
So when you are parked the Jeep is still doing 10km/h :lol: :finger:
Percentage is the right way to measure it.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 1434
Joined: Sat May 22, 2004 6:44 pm
Location: stalking

Post by blackmav »

Short GQ, Petrol, Turbo.
GQ TD42 ute
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Wooders wrote:
frp88 wrote:
love ke70 wrote:10kph at 50?
or 10 kph at 100?
percentages work so much better than a kph difference

id go off what the tyre says it is, theyre gonna be a little smaller than they state normally, so then u drive just under the limits.
keeps you safe :)
the diffrence is constance it is 10 kph
So when you are parked the Jeep is still doing 10km/h :lol: :finger:
Percentage is the right way to measure it.
Indeed - a constant 10kph difference is unpossible. I call BS.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Post Reply

Who is online

Users browsing this forum: No registered users and 147 guests