Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gq 4.2 clutch
gq 4.2 clutch
have got bad clutch shudder on my 94 gq have been well informed its the clutch being warped,can anyone recommend a hd unit? was going to fit a borg and beck or ap lockheed? cheers
Re: gq 4.2 clutch
at last something thats never ever been discussed before
Re: gq 4.2 clutch
thanks guys have also been told the exedy exteme clutches are very good,will google it first next time! cheersfatsogq wrote:have got bad clutch shudder on my 94 gq have been well informed its the clutch being warped,can anyone recommend a hd unit? was going to fit a borg and beck or ap lockheed? cheers
gq 4.2 clutch
hey guys sorry to butt in but ive just blown my clutch i think maybe gearbox but pretty sure its clutch. i had put the PBR Extreme 4x4 clutch with all thiss heavy duty hype on it which was fitted a year ago. i dont have the equipment to drop it. does anyone know of a good 4x4 mechnic to drop my box and have a look/replace clutch????? im in melbourne epping
Better off changing your clutch yourself its a very costly job to have a mechanic do it and its not that hard to do by yourself
Just had mine out to change the spigot bush (pilot bush) had to have clutch off and all also put a new thrust bearing and clutch slave cylinder in to done it by myself in about 4.5 hours with a few cans and on the concrete floor.
This is the third time ive had the box out aswell.
Done the clutch the first time then the next time clutch fork was bent and now to change the spigot bush.
My advice is while the clutch is off change the spigot bush its a $10 maximum part and for the hassle its worth it trust me
Just had mine out to change the spigot bush (pilot bush) had to have clutch off and all also put a new thrust bearing and clutch slave cylinder in to done it by myself in about 4.5 hours with a few cans and on the concrete floor.
This is the third time ive had the box out aswell.
Done the clutch the first time then the next time clutch fork was bent and now to change the spigot bush.
My advice is while the clutch is off change the spigot bush its a $10 maximum part and for the hassle its worth it trust me
LiVe HaRd DiE sIdE wAyS
I just searched for "GQ AND clutch AND TD42" and got:
http://www.outerlimits4x4.com/search.php?mode=results
Thats a bit better than 925.......
As said - dont skimp on the spigot bush/bearing. When the clutch is depressed this little jigger is taking all of the input shaft load/vibration. I've seen a dozen or so mates skimp on this part, and every one of them has had a big whinge about their new clutch cause it was still noisy.
To change the clutch is fairly easy - you just need someone that is big boned/fesively plump to catch the box when it comes down.
http://www.outerlimits4x4.com/search.php?mode=results
Thats a bit better than 925.......
As said - dont skimp on the spigot bush/bearing. When the clutch is depressed this little jigger is taking all of the input shaft load/vibration. I've seen a dozen or so mates skimp on this part, and every one of them has had a big whinge about their new clutch cause it was still noisy.
To change the clutch is fairly easy - you just need someone that is big boned/fesively plump to catch the box when it comes down.
Who is online
Users browsing this forum: No registered users and 150 guests