Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

A new 4by...... Zook perhaps?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

A new 4by...... Zook perhaps?

Post by -Mick- »

Having decided not to waste $$$ on my feroza I've been looking and thinking about a replacement, and a spook may be the best option I reckon. I really like the idea of being able to do most of the work on it myself with my modest tools :D I was thinking the following...

1985+ NT hardtop (cheap as possible but NO major cancer) $2 - $2.5k
Panelbeat/ respray myself $500
Offset sunraysias to WT spec $450
RUF (can't weld how much would it cost to get done?) $???????
Body lift 1.5" Won't cost me anything install myself ;)
2nd hand 31 muds for onroad $500
Welded rear $????? at a diff shop???

Essentially I was aiming to get a dd/ weekend warrior with a bit of potential on road for <5k

Then when I sell the feroza add S3 rockhoppers + 33/ 34" play tyres + 1.6 vit motor + small offroad trailer :D Should be a capable lil' beast then :D

Thoughts and suggestions/ ideas on missing prices anyone :?: Cheers :D
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

That's not a bad plan of attack, and I think you are pretty close to the money (pun intended :lol: ) with your $ figures.

You should be able to pick up a basically straight & rust free zook for those $

Rims should cost you $300 (that's what i paid for four 15x8 with -25 offset)

Make some bolt on brackets for the RUF and it wont be too costly. You'll need to source a set of springs and some longer brake lines though. Shocks will be your limiting factor though

I think you're on the right track.
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

Post by 12uke »

You could have a look at these x4 firestone firehawk mtr on brand new rims have about 1000kms on them and they are $550
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Make some bolt on brackets for the RUF and it wont be too costly. You'll need to source a set of springs and some longer brake lines though. Shocks will be your limiting factor though


mmmm good idea :idea: I doubt I could make them (safely anyway :lol: ) myself but have a mate who could.

Why will shocks limit may I ask? I have no qualms about buying long travel jobs if they're available, it's a cost I'd expect. Anyone recommend a good value option on the shocks :?: [/quote]
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Cheapest really long trave ashocks would be commoder VP ones.. about 750mm extended.

Dont expect high price ride quality or life expectancy - but if that dont matter buy them
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Suzuki Viagra wrote:Cheapest really long trave ashocks would be commoder VP ones.. about 750mm extended.

Dont expect high price ride quality or life expectancy - but if that dont matter buy them


what is the compressed length? ie are they long travel, or just long shocks? what mount type are they? me thinking 3/4 now tank is out the way. christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 83
Joined: Mon Dec 30, 2002 11:17 am
Location: Townsville, Qld, Australia

Post by qten »

hey MJ

Good move about moving forwards to the zuk's I finally saw the light again and sold my TJ and got a zuk again, still work in progress but its coming along fairly nicely considering I’ve only had it for a week or so.

Anyway I think your right on the money + mods sounds great. :shock:

I've also been thinking about welding my rear diff but I’m still not 100% sure on this one. I do know I don't want a open rear when wheeling anymore. Well when on the hills anyway :D

I'd have to say put a rollbar on ya list as I’ve seen how useless the top hoop is in my zuk ( it was in a accident by a motorbike ) so I’d hate to see the car roll on it.

Anyway Cool and good luck finding ya zuk. :armsup:

Qten,
Qten,
The Original Guzi Airlines, YC2004
__
__/ . \_
|____.__)
- (0) (0) ---------------------------
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

why narrow track?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 373
Joined: Fri Jun 27, 2003 2:58 pm
Location: cen vic

Post by toonfish »

nice red zook on ebay fro $450 so far
its in shepparton i think , vic
1981 in good nik :cool:
1995 lwb gq patrol 2.8 litre turbo diesel.
fairly standard for now cept a mostly rebuilt motor and front diff!!!!!!!!!!!!!.
100s gxl cruiser triple locked and plenty of afetrmarket touring crap!
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

why narrow track?


Springs are further inboard than WT so potentially better travel. Offset rims make up for the WT stability. Plus older/ cheaper = more $$ for mods :armsup:

Anyway I think your right on the money + mods sounds great.

I've also been thinking about welding my rear diff but I’m still not 100% sure on this one. I do know I don't want a open rear when wheeling anymore. Well when on the hills anyway

I'd have to say put a rollbar on ya list


Cheers :D Rollbar/ exo cage is a good idea :roll:

Welding your rear is one of those things I guess, you can ummm and ahhhh for ever or take the plunge. I say see what others with it done think of it and take the plunge :twisted:
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

It begins :twisted:

Just snapped up that LWB in for sale, I'm a zuki man now :armsup:

Now I just gotta paint the sucka :? :lol:
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Damn I wish i could decide to buy a zook and find a LWB soft top 6 days later.
yeshemesh
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests