Just checked compression having done 5000k's on the new rebuild. Readings 1-2-3-4 were 180-180-180-190psi. Results were consistent for 2 separate runs.
Suzuki service manual says "200psi / 400rpm" - is 180/190psi okay? Got no idea how many rpm it's actually doing turning over without firing, but I would suspect its considerably less than 400rpm ... probably more like 250-300rpm.
Compression tester is a cheapo Trisco from Sprints ($40), so not sure how accurate it is either, but at least the relative readings should be correct.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine compression test
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Who is online
Users browsing this forum: No registered users and 0 guests