Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo onto non-turbo SD33

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 7
Joined: Wed Nov 05, 2008 11:40 am
Location: Perth, Western Australia

Turbo onto non-turbo SD33

Post by Marz's Mad MQ »

Hey. I'm new to this forum am just after some suggestions/opinions on this topic.
I have a 1985 MK SWB SD33. I bought this car as a SD33T only to find that the head was cracked and had just been filled with magic head crack filler stuff:( After waiting for about half a year and no turbo motors apperaing in the paper i finally got a non-turbo motor. Seeing as i still have the turbo i'm hoping to bolt it on. I have the manifolds from the turbo but am wondering the best place would be to get oil feed and return? Any info on this would be great. Dont know if anyone else has done this before?

Cheers,

Marz
Top
Posts: 23
Joined: Thu Oct 30, 2008 3:45 pm
Location: Brisbane

Post by MKNUT »

you can put a t peice in where your oil pressure switch is. For your return you will have to modify the sump
Top
Posts: 7
Joined: Wed Nov 05, 2008 11:40 am
Location: Perth, Western Australia

Post by Marz's Mad MQ »

Sorry guys, realised theres already been heaps of talk about his topic :)

Cheers,

Marz
Top
Posts: 49
Joined: Fri Feb 08, 2008 8:23 pm
Location: Gold Coast

Re: Turbo onto non-turbo SD33

Post by Wrench_Pilot_86 »

Marz's Mad MQ wrote:Hey. I'm new to this forum am just after some suggestions/opinions on this topic.
I have a 1985 MK SWB SD33. I bought this car as a SD33T only to find that the head was cracked and had just been filled with magic head crack filler stuff:( After waiting for about half a year and no turbo motors apperaing in the paper i finally got a non-turbo motor. Seeing as i still have the turbo i'm hoping to bolt it on. I have the manifolds from the turbo but am wondering the best place would be to get oil feed and return? Any info on this would be great. Dont know if anyone else has done this before?

Cheers,

Marz
i swaped out a SD33T for a SD33 for a mate, before turboing the N/A motor make sure the steam vents in the N/A head are there cause SD's have a nasty habit of poping the head gasket if there not there,
went through 3 gaskets before looking at the original head and the n/a head,
rear quarters are evil and must be punished with rocks
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests