Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Landcruiser PTO interchangeability

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Landcruiser PTO interchangeability

Post by turbo4t »

I'm looking at a Landcruiser PTO here off a 60 series. I'm guessing the PTO unit will fit any 40/60 or 75 4sp/5sp or auto gearbox from 1980 - 1990 and any HZJ with the H55F 5 speed. Can anyone confirm this? I know the pre '80 transfer bolt up is completely different. Thanks
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

ive seen pto winches that are different widths.. even one off a 60 (supposedly) that wouldn't fit on another 60.

does the pto have a cradle? can you measure the width between the rails to confirm what it will fit?

oh.. and are you talking about the PTO box that bolts to the transfer or the entire thing?
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 291
Joined: Wed Jun 16, 2004 10:44 am
Location: Adelaide

Post by sambo »

A pto for a H55F will not fit to all those models. I don't think 40s camo out with the same transfer. That being said a 40 pto can be modified to work on a h55f transfer case.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

just to add i read some where that not all gearboxs haad the PTO gear so may be worth a look
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

shorty_f0rty wrote:ive seen pto winches that are different widths.. even one off a 60 (supposedly) that wouldn't fit on another 60.

does the pto have a cradle? can you measure the width between the rails to confirm what it will fit?

oh.. and are you talking about the PTO box that bolts to the transfer or the entire thing?
Hi Mate, just the PTO unit i'm referring to, the bit on the transfer. Cheers
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

sambo wrote:A pto for a H55F will not fit to all those models. I don't think 40s camo out with the same transfer. That being said a 40 pto can be modified to work on a h55f transfer case.
Post 1980 40's had the same transfer. The front halves varied between 4 and 5 speeds and the output shaft length varied for the 45/47 handbrake but the back casings which carry the pto are the same. Cheers.
Top
Posts: 166
Joined: Fri Sep 19, 2008 6:19 pm
Location: New Zealand

Post by xxxhilux »

Nat84 wrote:just to add i read some where that not all gearboxs haad the PTO gear so may be worth a look
yea but no
the ones that dont have the pto drive have a plate covering the hole that the drive bolts on to
sorry not sure about interchangeabilty but the shaft is differnt between the 40s and the 60s i know thats an easy fix but it is something to be aware of
http://www.outerlimits4x4.com/ftopic154894.php
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

I just replaced my TC.. The original had a spacer, the replacement had a gear.. Both built in the same year, 78.. I have a 73 that I was going to use as a replacement, it has the gear also.. 2 of 3 had the gear.. All I need now is the rest of the setup..
Top
Posts: 242
Joined: Wed Mar 19, 2008 10:56 pm
Location: Brisbane

Post by stockhorse »

Apart from pulling the cover is there anyway of telling if it has the gear fitted?
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

No. 10 min job to see if its in there..
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

vk7ybi wrote:No. 10 min job to see if its in there..
yep its easy as..
Image
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 42
Joined: Fri Apr 11, 2008 3:25 pm
Location: N/E Victoria

Post by Cyrel »

If the PTO box os off a 60 then it will fit the last of the 40,s The 60,s the 75,s and the first of the 79,s. The 80,s had a different TC and so did the later 79,s

Just have a look at the PTO cover and it will be very easy to see if its the one for you.

all the best wit it.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests