Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lifting the back seats in a 1.6 2door vitara

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 91
Joined: Tue Jul 01, 2003 2:39 am
Location: Perth

lifting the back seats in a 1.6 2door vitara

Post by drifta »

hey,

me and alien the other day tried lifting the rear seats in my 2 door vit the other day with no luck.. i can fold em down but couldnt put them up... anyone know how to do this? the lever on the back right hand side (standing at rear) didnt seem to do much either.

Cheers

Paul
found a 3door 1.6L efi vitara =) pm me for 4x4ing around perth
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

In the swb with the split seats, the knobs on top of the seats pull up to allow the back to fold up or down. To flip the base up from the rear you need to lift the levers on the bases under the seatbelt receivers but first you need to make sure that the seats are all the way back on the base slides otherwise you can't flip them up ;)
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 112
Joined: Tue Jan 22, 2008 6:43 pm
Location: perth, Australia

Post by shandy »

hi mate

i have the same car swb vitara and the same thing happened to me, have a look under the seat and follow the leaver cable around and see if it is court on anything and just give it a hit. it will come loose.

mitch
RAT
Posts: 43
Joined: Tue May 23, 2006 10:37 pm
Location: Melbourne

Post by RAT »

Hi
Same problem in my car. The leaver stopped moving the latches as the cable gets loose so get your fingers under the latches while pulling on the leaver to release the catch.
Also try standing in the back so you can pull up on the leaver with more force.
Posts: 137
Joined: Sat Dec 15, 2007 4:29 pm
Location: newy

Post by wardy1 »

i almost had a dam stroke trying to get those things up in mine...

So out came the grinder!
wardy - 1 seats - 0...
Post Reply

Who is online

Users browsing this forum: No registered users and 87 guests