Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone done the TB4.2 Carby to EFI conversion?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Anyone done the TB4.2 Carby to EFI conversion?

Post by RN »

Won't clog up the forum so if anyone has done it would they consider me a PM as to what hassles you had, costs, overview.

Not really chasing ext HP but it is something that I would like to do as a project down the track.

cheers

RN
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 292
Joined: Sat Apr 29, 2006 2:32 pm
Location: New Zealand

Post by David_S »

I converted the P40 engine of my MQ to efi using a megasquirt ecu and a Falcon EA throttle body. There is a lot of general information on the Megasquirt site and the Megasquirt forum applicable to all conversions. I did a bit of a write-up of mine plus pictures on http://www.rmp-o.com/phpbb/viewtopic.php?t=967 (Page 2)

It has certainly transformed my old truck. It is not a difficult conversion but you have to be quite methodical especially with the wiring or you will soon lose track of where you are.

David
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Excellent article you posted. Thanks.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 40
Joined: Wed Sep 05, 2007 2:56 pm
Location: BRISBANE

efi conversion

Post by choppedtrol »

i did the gq efi conversion and its simply the best thing i done. no stuffing round with dizzy's. straight swap. only hard thing is putting the efi wiring harness in. more fuel economical, lots more torqu, more power. cant complain.
GU ST 4.2TD UTE.
TRAY AND SLIDERS BY KUSTOM KAGES
Top
Posts: 1083
Joined: Tue Apr 26, 2005 12:08 pm
Location: Toowoomba

Post by Guy From Nowhere »

What was the average cost you guys were looking at with the do it yourself conversion?

Cheers,
GFN
[quote="MissForbyNooB"] I've played with you AND your missus. [/quote]
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

yer mate did it, then a week later turbo'd it, week or 2 after that NOS'd it. Works well :twisted:
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

WICKED wrote:yer mate did it, then a week later turbo'd it, week or 2 after that NOS'd it. Works well :twisted:
Pictures.

The Wiring harness. Can the EFI harness just be plugged into the main dash at a junction place where the original harness was. ie old harness out, in with the EFI.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 249
Joined: Tue Jan 01, 2008 8:53 pm
Location: gulf country

Post by rogantriton »

mate has just finished this converstion on his gq, he had to rip a good majority of the old harness out to connect the new one loooottttssssssss of wires
'08 BT-50: ARB winch bar and rails, Safari snorkel, Hella rally 4000 spotties, GME uhf, Dual battery, Long range fuel tank
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Just done it.

Bought an EFI GQ, swapped all the good bits off the old carby car and wrecked out all the other bits. Over 2K in front
:rofl: :popcorn: :snipersmile:
Top
Posts: 99
Joined: Fri Jul 11, 2008 7:41 am
Location: MINTO

Post by wyliespatrol »

So how hard is the wiring harness swap?

How deep do you have to dig?

Is it all plug in or is there cutting and soldering to do?

Chris.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests