Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Anyone done the TB4.2 Carby to EFI conversion?
A speed camera would have prevented that!
Anyone done the TB4.2 Carby to EFI conversion?
Won't clog up the forum so if anyone has done it would they consider me a PM as to what hassles you had, costs, overview.
Not really chasing ext HP but it is something that I would like to do as a project down the track.
cheers
RN
Not really chasing ext HP but it is something that I would like to do as a project down the track.
cheers
RN
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
I converted the P40 engine of my MQ to efi using a megasquirt ecu and a Falcon EA throttle body. There is a lot of general information on the Megasquirt site and the Megasquirt forum applicable to all conversions. I did a bit of a write-up of mine plus pictures on http://www.rmp-o.com/phpbb/viewtopic.php?t=967 (Page 2)
It has certainly transformed my old truck. It is not a difficult conversion but you have to be quite methodical especially with the wiring or you will soon lose track of where you are.
David
It has certainly transformed my old truck. It is not a difficult conversion but you have to be quite methodical especially with the wiring or you will soon lose track of where you are.
David
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
efi conversion
i did the gq efi conversion and its simply the best thing i done. no stuffing round with dizzy's. straight swap. only hard thing is putting the efi wiring harness in. more fuel economical, lots more torqu, more power. cant complain.
GU ST 4.2TD UTE.
TRAY AND SLIDERS BY KUSTOM KAGES
TRAY AND SLIDERS BY KUSTOM KAGES
A speed camera would have prevented that!
Pictures.WICKED wrote:yer mate did it, then a week later turbo'd it, week or 2 after that NOS'd it. Works well
The Wiring harness. Can the EFI harness just be plugged into the main dash at a junction place where the original harness was. ie old harness out, in with the EFI.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Who is online
Users browsing this forum: No registered users and 0 guests