Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

New exhust question

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

New exhust question

Post by grumpy221 »

Hi Folks I'am about to put a new exhaust on new extractors 2 1/4 system new cat etc. Thing is have 2 quotes so far ...... $1700 & $1000 ! the first comes with a small resonator and $1000 for the extractors alone. How much have you paid for a new system and where?
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Top
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Post by Sammyboy »

Mine is a Turbo Diesel NG, so I don't have extractors, but I do have a 2.5 sports system (no turbo dump pipe) from the flange back (I think) and I payed $420 fitted. I don't know what sort of exhaust that you are paying for (I don't know if it's mandrel bent or not) but those prices seem a little steep to me. I also have a Suzuki Sierra with a 2" sports system and extractors set up for below $600 fitted. I understand that your Paj V6 is alot bigger than my Zook, but even still that seems expensive.
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Top
Posts: 2
Joined: Mon Aug 11, 2008 3:36 pm
Location: Melbourne

Post by twwoodrow »

My NM manual, petrol, Exceed is in today getting a complete 2.5" exhaust refit from the headers right through to the tail pipe. All Stainless Steel + free flow cat' converter. Also getting the O2 sensor/s replaced.
I expect a total bill approx $2k.
Therefore, your quotes seem ok to me.
Work is being done by Ringwood Performance Exhaust. Recomended to me by a number of people including members of the Vic. Paj' Club.
Top
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

sounds about right, maybe a tad pricey, i got my 2.5" exhauhst and high flow cat done for 750, didnt get the extractors coz they wanted 900 for them so yeah sounds bout right
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Mine was about $1600 fitted from memory.
Genie headers, high flow cat (from some V8 Guppydore derivate), high flow turbo muffler and 2.25" exhaust. Also had to have 2-3 exhaust studs replaced (about $60).
The 3.0 V6 is a bitch to fit extractors real knuckle scraping stuff mine had a 2" body lift at the time which helps a lot.
The new system did make a power difference and gave it a real crackle at high revs.
I just luv my "clacker Jabber"
Top
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

thanks for the replys going for the cheaper 1 genie extrators will have to ask them about the high flow cat (r they worth extra?)
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Top
Posts: 2
Joined: Mon Aug 11, 2008 3:36 pm
Location: Melbourne

Post by twwoodrow »

Mine ended up cosing about $1700. Very happy so far, but the wife keeps complaining about the "loud noise" :twisted:
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests