Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Electric endless air

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Electric endless air

Post by Kitika »

Does anyone know what cars came out with bearings in there starter motors? I'm going to attempt to make an electric endless air out of an old aircon pump and I have access to a few old starter motors from the tip and some mates' old wrecks.
Some people have suggested using a generator out of really old cars? I'm not to sure what this generator did or what wrecks I can find them on.

The pump will only be used occasionally to fill up 4 tyres and not to continually fill up an air tank like the onboard engine driven compressors do so I think a starter motor won't get to hot in that time.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Good luck to you.

I've never seen a car starter motor with bearings, they are all bronze bushes.
A starter is NOT suited to the application you wish to apply it.
They get very hot running for more than 30 seconds or so even with no load, as they are not vented and have no cooling fan.
A generator won't work either. The produce power when turned, they aren't a motor.
If you want to use an AC pump just make a bracket and bolt it to your engine.

OR
You could carry a bottle of CO2 or nitrogen.
http://www.izook.com/tech/accessories/co2/hbco2.htm

Jas.
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

They get very hot running for more than 30 seconds or so even with no load, as they are not vented and have no cooling fan.
Could some vent holes and/or a cheap little cooling fan help it out? I don't have enough space to fit the aircon pump under the bonnet and since I got all the parts thought it may be worth a shot.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

In short... NO.
Starters are made for high load for a short time.
You want to do it the other way.
It will work but not for long and will use LOTS of battery power.
You may get away with a high speed motor (EG wiper motor) with a reduction drive but I can't think of anything that will have enough grunt to run an AC pump.

Just put an electric compressor in the back and sell the AC pump to someone who has room to fit it.
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

Thanks want33s I guess i'll leave the idea until maybe I run out of things to do in the shed one day and need to something to tinker with.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 127
Joined: Wed May 02, 2007 12:08 am
Location: west gippsland

Post by narns1mav »

get a boss grande air compressor
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Warn make a winch/compressor combo. Not cheap (of course...).

If you want a motor for your compressor try an el-cheapo Chinese winch motor. Would be more suited for the moderate load/moderate duration duty cycle you need.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

How much are the winch motors Damkia? They might be worth a shot if they are cheap enough to experiment with.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

ebay.

why havnt u got room for endless?

as i have in mine installed the 1.6 mpfi, dual batts, endless air.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Kitika wrote:How much are the winch motors Damkia? They might be worth a shot if they are cheap enough to experiment with.
contact tigerzII (?) on here.

He sells pretty reasonably priced winch motors and solenoids.

I was looking at the starter idea but a winch motor would be much better suited and quite cost effective.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »


why havnt u got room for endless?

as i have in mine installed the 1.6 mpfi, dual batts, endless air.
My sierra has got an endless air system on it and it's awesome at pumping up tyres etc and I want one my 80 series aswell but seeing as I have supercharged it and hopefully intercooling it in the not so distant future there won't be any spare space for the pump. That's why I'm thinking of an electric one. I'm picking up a starter motor and wiper motor this weekend out of a sigma so I'll be able to start making up a frame and testing it all out.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

Alright done alittle bit of testing and here's the results thus far.
The wiper motor with gears turns way way way to slow to be of any use as the pump motor. I'm going to try it with no gears and see how it goes then. Its also only pulling 4amps with no load on it.
The starter motor was pulling 60amps with no load but the back came loose after 1 minute of running and it only got a little bit warm over that time span. It also needs to have new bushes. After all that it should be a goer I think
:D
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 3
Joined: Sun Dec 03, 2006 8:26 pm

Post by dirttracker4x4 »

try this web site
http://www.oasisoffroad.com
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

use a vn-vs commo thermo fan motor plenty of balls, not too much heat or current draw
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

With some internal rewiring a generator can work as an electric motor - they are capable of producing significant power and torque without overheating.

All this of course comes at the expense of current draw no matter what motor you run... if you want power out you have to provide the input power
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests