Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What to paint the floor with

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 40
Joined: Tue Jun 05, 2007 10:07 pm
Location: Somewhere in the bush or snow

What to paint the floor with

Post by Ausi fj »

I have just had my fj45 body sandblasted. I want to paint the floor with a good sealer of some type. I DON"T want to put in any carpet, just use a textured floor paint. Any suggestions on what to use.

Scott
4x4 Addict. 2002 Patrol, 1977 Fj45, 1975 Fj40, 1993 Vitara, 1983 Sierra Off Road Buggy
Top
Posts: 93
Joined: Wed May 14, 2008 11:36 pm
Location: Nth Tassie

Post by uted1 »

I would paint it with rust bullet to stop any further rust and then use one of the roll on ute liner type finishes or get it rino lined.
Just remember it's going to be a bastard to get off if you need to do any repairs in the future

My 2c
Top
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

I did mine with spatter paint..

Ive heard a few times that Rhino paint comes off after a while.

The spatter paint I used sticks like shit'e on a blanket...

Image
Top
Posts: 40
Joined: Tue Jun 05, 2007 10:07 pm
Location: Somewhere in the bush or snow

Post by Ausi fj »

crozza wrote:I did mine with spatter paint..

Ive heard a few times that Rhino paint comes off after a while.

The spatter paint I used sticks like shit'e on a blanket...

Image
That is the finish I am looking for. How much and where did you get it from.
Thanks
4x4 Addict. 2002 Patrol, 1977 Fj45, 1975 Fj40, 1993 Vitara, 1983 Sierra Off Road Buggy
Top
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

Its called Aquaflek..You can get similar types.
Its just primarily called spatter paint.. some call it colourflek.
Comes in a 1lt tin..this is plenty.
you have to spray it on. Very high pressure around 100psi and a 2mm upwards tip on youre spray gun. I etch primed the floor first then sprayed it on. You need to place then gun close as possible when spraying.
Its around $50 a tin

Most paint shops have it.....
If you want more pics go to my thread..

http://www.outerlimits4x4.com/ftopic150992.php
Top
Posts: 1
Joined: Sun Nov 30, 2008 4:40 am
Location: Placerville, Ca

Post by J-Rod »

Friend of mine just put hurculiner in his cab. We've had this stuff in the bed of our trucks for years and it's never been flaky. Not sure if you guys have autozone, Kragen, or some kind of auto store. But it ran $100 for the gallon. I'll try to get some pictures and post em.
Top
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

You can get it here in Oz but youll pay a couple of hundred for it and its hard to get. I have heard that it comes off aswell, but I guess its all in the prep work too.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Just Rhino line it, or herculine it, or even paint in some hard as body deadener, then paint over it, if you want it to look clean on top of that.
hands and mums dont count!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 138 guests