Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series Poor Power Steering. Pump or box?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

80 Series Poor Power Steering. Pump or box?

Post by Surfin Alec »

Hi all,

My 97 TD's power steering has been getting worse over time, to now its almost not working at all at low speeds. (I got 33's).

Only leek/symptom I got is my resovoir weeps slowly from the lid. I have checked the seal and it looks ok, I even bent down the tabs on the lid to get it to seal tighter, replaced the hose clamps etc but still it weeps. Its almost as if it may get some pressure in the resovoir to make it weep. Could this be related?
I have no leaks from the PS pump or at the box?

Any ideas welcomed....
GO the 80...The mods have started :-)
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

If it's not giving you any assitance at low engine and vehicle speed the pump will be worn not dellivering full pressure you can get them tested in car. The weep around the filler cap could be the resivior building up pressure or maybe just try a new seal.
plenty of parts on the bench
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

Hey Alec, had similar issue with very heavy steering (not with the reservoir tho :? ) and was the pump.
Replaced it with a 2nd hand pump and has been fine since.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

Thanks guys, I rekon you might be onto something Doug and just replace the pump with a 2nd hand job. Then if needed I can re-build my old one, one day.
GO the 80...The mods have started :-)
Top
Posts: 345
Joined: Mon Aug 04, 2008 8:48 am

Post by chpd80 »

The resivour also has a filter in it witch can get blocked and restict flow as mine did.
I bent the tabs back and pulled the cover off to get to the filter screen and found it was very blocked. Also helped stop the leaking from around the top part as I reclamped it tighter over the o-ring.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests