Hi there great forum you have here, i joined ages ago and have had awnsers to my questions without having to post as i searched for them, but i need some help with this one, i am going to put a safari snorkel on my pajero when i find the right part number for it, a few dealers have said no there is not one for that model/engine/year, ive got a late 1996 2.8 with a 4M40 engine (Electric fuel pump), problem is safari's website only shows my engine for a triton year 10/97 with a part number ss650hf, so does this this fit mine or what will, i have emailed safari today so see what they recomend, next here in the uk its always raining does this mean the rain will go down the snorkel!!! whilest driving, and one more thing is it an easy job to extend the axel breathers as i want to do these too.
Thanks
Colin.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pajero Snorkel Help.
Moderator: -Scott-
Pajero Snorkel Help.
1996 Pajero LWB 2.8 Silver/White.
"The Muts Nuts"
"The Muts Nuts"
Welcome to the board Colin.
Yes this has been a problem with the 2.8TDi and 3.5 V6 models.
But I can assure you there are plenty of both models over here fitted with both Safari and Airtech snorkels it's just that they don't list a specific part no for each.
The installations I have seen involved a little custom ducting from the inner guard to the airfilter box and this was done by the installers (ARB, TJM).
For specific snorkel part no's you could try the Pajero Club forum http://www.pajeroclub.com.au/forum/
As far as rain water entering the snorkel the ram air effect quicky vaporizes the droplets by the time they reach the airbox providing it's not an absolute torrent. Some guys spin the intake of the snorkel around to face the other way in seriously dusty or wet conditions tp prevent excessive ingress. There is also a product available from Finer Filter called a snorkel sock which sleeves over the intake but this is mainly for excessive dusty/sandy conditions. I'd imagine in the UK rain would be the issue so I think you will be fine.
As for diff breathers I wrote an article for Trail Talk about this http://www.4x4wire.com/mitsubishi/tech/ ... breathers/
Hope this helps.
Frank.
Yes this has been a problem with the 2.8TDi and 3.5 V6 models.
But I can assure you there are plenty of both models over here fitted with both Safari and Airtech snorkels it's just that they don't list a specific part no for each.
The installations I have seen involved a little custom ducting from the inner guard to the airfilter box and this was done by the installers (ARB, TJM).
For specific snorkel part no's you could try the Pajero Club forum http://www.pajeroclub.com.au/forum/
As far as rain water entering the snorkel the ram air effect quicky vaporizes the droplets by the time they reach the airbox providing it's not an absolute torrent. Some guys spin the intake of the snorkel around to face the other way in seriously dusty or wet conditions tp prevent excessive ingress. There is also a product available from Finer Filter called a snorkel sock which sleeves over the intake but this is mainly for excessive dusty/sandy conditions. I'd imagine in the UK rain would be the issue so I think you will be fine.
As for diff breathers I wrote an article for Trail Talk about this http://www.4x4wire.com/mitsubishi/tech/ ... breathers/
Hope this helps.
Frank.
I just luv my "clacker Jabber"
Welcome Colin!
The Board Welcomes you!!!
The Board Welcomes you!!!
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Colin. wrote:Thanks for the welcome, Cheers Frank I am going to a place next week to try and match one up, Will see what does'nt fit/match up then go from there.
Thanks
Colin.
In terms of intake mods, depending on your app and model, you might find this helpful as well...
One of my Yank buddies did it up for us:
http://www.4x4wire.com/mitsubishi/tech/snorkel/
HTH,
PHIL
www.4x4wire.com/mitsubishi
shorty diesel paj
shorty diesel paj
Who is online
Users browsing this forum: No registered users and 17 guests