When A hilux CV breaks what part of it usually breaks ?

Post by **beefa125** » Thu May 26, 2005 1:50 pm

Hi Guys,

Hear that breaking CV's can happen pretty often with LockRites in the front, I just got one for 200 bucks off a mate and was wondering what part generally breaks in the cv when they do actually break,

Cheers

Beefa

Post by **Gribble** » Thu May 26, 2005 1:55 pm

beefa125 wrote:Hi Guys,

Hear that breaking CV's can happen pretty often with LockRites in the front, I just got one for 200 bucks off a mate and was wondering what part generally breaks in the cv when they do actually break,

Cheers

Beefa

The CV itself, the big ball looking thing that sits between the two axles.

Post by **phippsy** » Thu May 26, 2005 3:51 pm

It shouldn't look like this...

Post by **beefa125** » Thu May 26, 2005 4:33 pm

Cool Guys thanks for the tips

Beefa

Post by **joel HJ60** » Thu May 26, 2005 8:55 pm

the big ballish part clan snapped of mine, and the 6 ball bearings were all over the place. Should be back on the road tomorrow, after the brakes are bled

Post by **BOGAN V8** » Fri May 27, 2005 11:10 pm

They can also break the star in the middle that sits inside the cage where the balls are at.. PITA

Post by **mico** » Sat May 28, 2005 8:02 am

mine breaks the shaft and it has a lokrite in it but its also ifs

Post by **Surfin Alec** » Sun May 29, 2005 7:17 pm

I just pulled 1 out of my mates 60 yesterday out at Newnes. The inner cage exploded and the balls jammed up the steering. The outer part of the CV stayed intact, just scared heavily.
He has a airlocker and was doing nothing too hard and in a stright line!!!

Alec

Post by **Sic Lux** » Thu Jul 20, 2006 10:56 pm

Have air locker in the front broke a profield outer bell split flat on one side to the flat on the other done a stock one inner star broke.

Post by **betseylux** » Wed Dec 10, 2008 4:57 pm

i distroyed my long CV last night not fun at all. where in sydney is the best place for spares

Post by **DIRTY ROCK STAR** » Wed Dec 10, 2008 7:01 pm

long side or longfield?

Post by **tom_286** » Wed Dec 10, 2008 8:12 pm

I drive a landcruiser but I beleive the CVs are the same as Lux CVs. I broke many CVs with the old auto locker (lock rite). All but one of the them the bell has cracked, but the other one the inners cage broke, bell still intact. Another common thing is the stub axel snapping.

Tip with the lock rite: Be very carful in reverse, and try your best to have the steering as straight as possable when reversing.

Post by **Weiner** » Wed Dec 10, 2008 9:04 pm

Just get some longfields and don't worry as much

Post by **ranover** » Sun May 15, 2011 8:54 pm

hey guys

i just recently got a hilux and want to know how to take care of them to a point without being to soft on them or if there is a cure

. also is there a way to change them that is easiest for you guys ive never done one before and would like to practice. was thinking of lashing out on some dirty 30s but also could just get 2 sets from the wreckers for under 200.

the truck is lock f+r with dual transfers and 36 simex ET2 so i know im goning to break them

Post by **phippsy** » Sun May 15, 2011 9:08 pm

For easy change, I'll try to get it right, but others will have more experience...

When I did mine, I seperated the inner axle from the cv joint. On the axle spline where it meets the diff, there was a clear wear mar on the teeth. I held a small piece of angle on that wear mark and put a couple of small tack welds in the spline and snappd the angle off. Then I filed the small welds down so it wasn't proud of the spline.

As fas as I know, that wweld stopped the axle from moving any further into the diff centre and I didn't have to put the inner circlip on the axle inside the cv. May be right, I can't remember, but after I did this, it didn't cause me any drama's anyway.

This way , when you break a cv, you are able to undo the king pin bolts and slide the whole knuckle off in one piece.

Post by **Sic Lux** » Sun May 15, 2011 9:25 pm

ranover wrote:hey guys

i just recently got a hilux and want to know how to take care of them to a point without being to soft on them or if there is a cure . also is there a way to change them that is easiest for you guys ive never done one before and would like to practice. was thinking of lashing out on some dirty 30s but also could just get 2 sets from the wreckers for under 200.

the truck is lock f+r with dual transfers and 36 simex ET2 so i know im goning to break them

Go the 30 spline upgrade longfields or dirty 30's my pick is the first of the 2. Yeah you can buy the cv end for 70 or so dollars new. Its a mega pain in the arse out wheeling in the rain or at night and you bust a cv. Then have to pull it out on the side of the track so you can drive home because a broken part of the cv has jamed the nuckle. You can't turn it or can only turn one way been there done that longs were one of the best things i purchased for my hilux. http://locktup4x4.com.au/hilux-solid-front-78/axle-91/" onclick="window.open(this.href);return false;

Post by **hulsty** » Mon May 16, 2011 9:00 am

So you spent all that money on setting the rig up and now skimping on cvs? Dont be tight and get longs, best money I have spent on my 4x4 I reckon, gives you confidence to use the front locker properly on loose shale, rock etc.

Post by **sprungupcruiser** » Mon May 16, 2011 10:25 am

hulsty wrote:So you spent all that money on setting the rig up and now skimping on cvs? Dont be tight and get longs, best money I have spent on my 4x4 I reckon, gives you confidence to use the front locker properly on loose shale, rock etc.

100% agree, I run 37's, v8 and locker in the front, I don't even think about my cv's. Get longfields, worth every cent for the peace of mind knowing that I can give it a flogging and I won't have to go pulling down the front axle.

Post by **ranover** » Mon May 16, 2011 5:51 pm

i would love some longs but need some cash first however in the meantime i want to know the easiest why to fix them if i need too. also i bought the truck as is and am looking for things that are a necessity which is CVs

Post by **Z()LTAN** » Sat May 21, 2011 2:38 am

Yer they are only so strong though..

Post by **sprungupcruiser** » Sat May 21, 2011 6:05 am

You're an exception.

Post by **ranover** » Sat May 21, 2011 9:05 pm

so what about the dirty 30s they seem ok from what i have seen. not sure what else is out there

Post by **Z()LTAN** » Sat May 21, 2011 10:37 pm

Give the trail gear cvs a miss, go with longs or track assassins.

Give Chris at Locktup 4x4 a call, the track assassins are really good for their price. Im running them in my 75 series with 40" sticky treps at the moment.

Very happy with how they have held up so far.

Post by **ranover** » Sat May 21, 2011 10:51 pm

Z()LTAN wrote:Give the trail gear cvs a miss, go with longs or track assassins.

Give Chris at Locktup 4x4 a call, the track assassins are really good for their price. Im running them in my 75 series with 40" sticky treps at the moment.

Very happy with how they have held up so far.

cheers

im running 36 simex so the track assasins sound good but if i can get the dollars will go with the longs

Outer Limits 4x4 Board

When A hilux CV breaks what part of it usually breaks ?

When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

lus CV's

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Re: When A hilux CV breaks what part of it usually breaks ?

Who is online