Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Injector pumps: 2.8

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Diesel pumps: 2.8

Post by bogged »

Barnsey wrote:What's the best way to fix this?
trade it in
delete this thread, and say you knew nothing of it
pay shit loads.
or pump from wreckers, after all your only floggin it off.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Diesel pumps: 2.8

Post by bogged »

Barnsey wrote:
bogged wrote:
Barnsey wrote:What's the best way to fix this?
trade it in
delete this thread, and say you knew nothing of it
pay shit loads.
or pump from wreckers, after all your only floggin it off.
Bruce, it's a small town, the next one is 90 minutes drive away, and there's lots of pig shooters with big guns out here.

I'm best to sell it legit. I'll fix it if it's not too expensive, and sell it to a keen local, or I'll fark it off at a reduced price.

On the up side, is that I know lots of fitters willing to work on week ends for rum.

Surely there's a kit you can put through them?.

PS yes I did search
send a PM to Andy at dieseltec
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

Speaking form experience, everything on the 2.8 is expensive........

There is a mob in Melbourne which is probably no good to you who overhaul injector pumps called Marrasi & Williams but thought I would telll you anyway.

How much is $$hit loads?

You could probably pick up a second hand one from someone doing a 2.8 - 4.2 conversion. Keep an eye out on Egay.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Barnsey wrote:
T_Diesel wrote:Speaking form experience, everything on the 2.8 is expensive........

There is a mob in Melbourne which is probably no good to you who overhaul injector pumps called Marrasi & Williams but thought I would telll you anyway.

How much is $$hit loads?

You could probably pick up a second hand one from someone doing a 2.8 - 4.2 conversion. Keep an eye out on Egay.
Quoted $2k plus
about normal price for a diesel pump rebuild.
Posts: 249
Joined: Tue Jan 01, 2008 8:53 pm
Location: gulf country

Post by rogantriton »

by diesel pump do u mean the injector pump?? if yes my gu 2.8 has a farked one and i got quoted $1600 to get it rebuilt or $2300 for a brand new one.
'08 BT-50: ARB winch bar and rails, Safari snorkel, Hella rally 4000 spotties, GME uhf, Dual battery, Long range fuel tank
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

Barnsey wrote:
T_Diesel wrote:Speaking form experience, everything on the 2.8 is expensive........

There is a mob in Melbourne which is probably no good to you who overhaul injector pumps called Marrasi & Williams but thought I would telll you anyway.

How much is $$hit loads?

You could probably pick up a second hand one from someone doing a 2.8 - 4.2 conversion. Keep an eye out on Egay.
Quoted $2k plus
Whats that price include, does it include R&R or is it just the pump o/haul.

Whats the symptons and why are you needing to replace it.

MAtt
Posts: 68
Joined: Sat Jul 15, 2006 4:33 pm
Location: SYDNEY AUSTRALIA

Post by mr nismo »

rogantriton wrote:by diesel pump do u mean the injector pump?? if yes my gu 2.8 has a farked one and i got quoted $1600 to get it rebuilt or $2300 for a brand new one.
$2300 new? Where from?
Posts: 249
Joined: Tue Jan 01, 2008 8:53 pm
Location: gulf country

Post by rogantriton »

yeh around that including fitting, thats mates rates on fitting and trade price for pump. just a place up here in brissy
'08 BT-50: ARB winch bar and rails, Safari snorkel, Hella rally 4000 spotties, GME uhf, Dual battery, Long range fuel tank
Posts: 43
Joined: Tue Nov 25, 2008 6:15 pm
Location: brisVagas

Post by allisterrenee »

I'm in Brisbane and mine had a small leak. I was quoted $900 if i took the pump off myself , which is a very easy job on a 2.8 . Mine has no cable going to the pump just wires. GU. It can be done cheap. I was told to also do the timing belt while the jobs being done... :)

I would just knock some off the price and sell letting the new owner know about it . When i bought mine it was leaking , no one told me i had to find out the hard way , but sh*t happens , i am happy with the car. It passed a road worthy when i got it, because it wasn't dripping on the ground ..lol any way hope this helps :D
Lifted turbo GU , 900blade .. TLR1000 "the dark side" , Boat ,
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

Barnsey wrote:Injector pump, is what I meant. :oops:

Had a mate (fitter) look at it yesterday. It's leaking fuel from the front side.

There's a pump specialist in town that mainly does heavy diesel jobs (cat, etc) who'll do the job at "mates rates".

It was suggested that I could leave it go, (since I'm selling the car) but the rest of the car is immaculate, and I'd like it gone a t a good price, with no faults. As stated before, I have to LIVE in this town.
I would strongly suggest that you have it removed and resealed and tested and it should not cost you much more than $1300 if its only a reseal and test.

The prices you are being qouted are for a total rebuild with new parts of which it may not require,if its running/starting fine then i see no reason why it would be any more.

Youre choice but that is what i would do and if it tests up fine then there is no recall on you at all.

MAtt
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i got quoted 8k just for the pump no labour from nissan, wankers! they also tried to sell me a fuse for $45.
you can get a quick fix kit from nissan for about $100 which will last about a month but i would trade it in.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

matto wrote:you can get a quick fix kit from nissan for about $100 which will last about a month but i would trade it in.
What does this kit do? What does it include?

Cheers
Posts: 43
Joined: Tue Nov 25, 2008 6:15 pm
Location: brisVagas

could be cheap?

Post by allisterrenee »

On my other Patrol it had a leak and it was a 2 bolt plate on the side of the pump .
E :) asy as to undo and replace with a seal from nissan for $13 .

It looked bad at first but turned out to be an easy fix.
Lifted turbo GU , 900blade .. TLR1000 "the dark side" , Boat ,
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

Sounds similar to the advance plate/seal I had put on my GU
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Re: could be cheap?

Post by T_Diesel »

Barnsey wrote: As above, turned out to be 3 O rings, and half an hours work. Car's now sold, getting picked up tomorrow.

Going to miss the old beast :cry:
What Vintage was it, mods etc and how much did you get for it if not a rude question? Just curious as thinking about selling mine for a TD42 (Bogged is trying to convince me that I want one).
Post Reply

Who is online

Users browsing this forum: No registered users and 141 guests