Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

More Sierra woes

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 30
Joined: Thu Jun 05, 2008 6:57 pm
Location: Brisbane

More Sierra woes

Post by greenzook89 »

as per my previous thread, i'm having more trouble with the sierra, I think it needs a carby rebuild but i'll ask first.

it still idles bad, but lately its been hunting at low revs and today i was on the way home from a play and it wouldnt hold a constant throttle, it just dies, if i give it a bootful it splutters for about half a second then revs quite happy,

any ideas guys?
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Post by Sammyboy »

I had a problem like that a couple of years ago- I thought it was the carby straight away. When I was cruising on the open highway at 90 to 100kmh, sometimes out of the blue, my car would loose all power and drive really rough (sometimes stalling) for a short time, then it would be ok after that. With my car, it actually wasn't the carby, it was the distributer. Maybe that could be a possibility with yours too?
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Also had a similar problem, but on a completely different engine.

Was the spark plug leads! What condition are yours in?

Mike
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

Checked the fuel filter? Could be blocked or as said earlier it could be the dissy or leads and as you've said even carby. Have you tried putting your hand over the top of carby when its at a few revs to try and suck through any crap that could be in the fuel bowl?
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

On mine it would start and idle fine in my dirveway but as soon as i took it for a drive it wouldnt idle, would run like crap at low rev's and stall etc. My problem was my charcol canister had water in it and the fuel tank wasnt breathing so i was getting a vacuum back into my fuel tank pulling the fuel out of my carby, it had me scratching my head for ages untill my old mans mate said take it for a drive with the fuel cap off and it run fine. I blew the charcol canister out with compressed air, put it back and havnt had a problem since.
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Them carbon/charcoal (or whatever it is) cannisters seem to do more bad than good.
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

mike_nofx wrote:Them carbon/charcoal (or whatever it is) cannisters seem to do more bad than good.
That sh#t got turfed along with the sway bar..... :D

I had similar issue with carby turned out the bushes were gone for the butterflies you can check for movement your self. Mine would be okay one day, bad the next or shut down on full revs then not idle and only work on full revs. THere was so much play that it was jamming up sometimes.
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

mike_nofx wrote:Them carbon/charcoal (or whatever it is) cannisters seem to do more bad than good.
i plumbed my diffs, g/box and trans case breathers into mine. :armsup:
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

Them carbon/charcoal (or whatever it is) cannisters seem to do more bad than good.


i plumbed my diffs, g/box and trans case breathers into mine. armsup
Thats an awesome Idea i might do that too!
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 30
Joined: Thu Jun 05, 2008 6:57 pm
Location: Brisbane

Post by greenzook89 »

ok, leads are pretty good, gonna try a few of those things stated and see how it goes!
Posts: 101
Joined: Mon May 23, 2005 12:15 pm
Location: Kilmore

Post by sierrafreak »

I currently have the same problem

Its been like it for a long time and through that ive had the carby rebuilt and still does it so i might have to try new leads, plugs, coil, rotor button and rotor cap.

Anything else it could be??

Im going to try and do one thing at a time so i can pin-point the problem.
LiVe HaRd DiE sIdE wAyS
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

I think i have the solution to all your probs !
take the car for a drive with the fuel cap off (obviously not with a full tank) if the car stops running like crrap then the problem is in your emmissions system.
When the charcoal canister or adjoining lines is blocked then this causes the fuel tank to pressurize and makes your car run puss.
To fix this problem blow out all hoses leading to and coming out of the charcoal cannister with high pressure air or alternatively replace the part of the emission system that is blocked.
i have been through it all before with a mate went through like 3-4 carbys, timing, blah, blah, blah
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

crrap wesely beat me 2 it
u r gaaay
Posts: 101
Joined: Mon May 23, 2005 12:15 pm
Location: Kilmore

Post by sierrafreak »

but mine is an intermittent problem as it can be fine then after wheeling it stuffs up and wont idle and runs like a pig

And i always have to de-press the accelerator three times give it a kick in the guts then it starts no problem.

Unless its sat for a while then its take about 2mins of cracking and pumping for it to start.
LiVe HaRd DiE sIdE wAyS
Posts: 30
Joined: Thu Jun 05, 2008 6:57 pm
Location: Brisbane

Post by greenzook89 »

Unless its sat for a while then its take about 2mins of cracking and pumping for it to start.

mine also has a temporary plastic fuel cap on it, would it still pressurize?

Same problem with mine, anyway the screen got smashed yesterday so now thats another thing to fix, anyone wanna buy a cheap sierra??
Posts: 27
Joined: Tue Oct 02, 2007 1:05 pm
Location: Tamworth

Post by gadZOOKs »

ok, some easy fixes, im still relatively new to the sierras, but ive had all sorts of troubles so im almost well versed in the little buggers
1: change your fuel filter, pour some metho into the fuel tank, say a cup roughly, leave the cap off and run it for a bit. a short drive should suffice, whack the cap back on. if there is a heap of crap in your tank or lines, it will go better for a little while, but start doing it again, so either more metho, or clean ya tank and lines out along with yet another filter.
2: check your coil
3: rotor button and points gap
4: plug gaps, leads
when i first got my sierra, i got it to "replace" my old hilux after i wrecked it. so points and plugs werent my strong suit, a month of owning my sierra, and i have them down pat. these are just tech tips mates have shown me, or told me about using same vehicle models, or just petrol engines in general
Posts: 4
Joined: Thu Nov 20, 2008 5:33 pm
Location: Sydney

Post by jarrad510 »

i have pretty much all the above mentioned problems, but it only happens when i go over a few bad bumps/potholes. im thinking its the dizzy or an electrical problem. any ideas?
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

When my zook was running the original carby I ended up having bad idle etc and found it to be the throttle shaft had flogged out and was creating a vacuum leak. I've your car does it over bumps and potholes etc it could possibly be high float level? I've heard of that being the case on webers but not on stock carbies tho.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

cutting out over bumps is normally due to a poor electrical connection somewhere. but as with everything it could be anything :armsup:
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

You could get a Mikuni carby or 3K/4k carby from the wreckers and bolt that straight on. Would cost about $30 take about 2 hours to set up and then you'll know if it was the dodgy unreliable stock carby or not :lol:
More Suzuki parts going to the big Suzuki Heaven in the sky!
Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests