Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G10A into LJ50

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 159
Joined: Sun Sep 17, 2006 12:23 am
Location: Tamworth, NSW

G10A into LJ50

Post by ricky1970 »

Anyone done this conversion?

If so-
How did it preform, on road and off? Economy?

Any nasty suprises to look out for?

How tight a fit is the Sierra 5-speed in the LJ tranny tunnel?

Could you close the bonnet without modifying it or a body lift?

Would you do it again?

Weighing this conversion against a 3/4K toyota, which after reading a lot of posts, looks to have too many drawbacks.

Rick
Top
Posts: 27
Joined: Fri Apr 14, 2006 12:21 pm

Re: G10A into LJ50

Post by yano »

lj10.com .....
Top
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

http://www.lj10.com/forums/index.php
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Are you sure you mean G10, or F10?
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 159
Joined: Sun Sep 17, 2006 12:23 am
Location: Tamworth, NSW

Post by ricky1970 »

Gwagensteve wrote:Are you sure you mean G10, or F10?
Yes G10, as in 1L 3 cyl all alloy (i believe) suzi donk as fitted to some swifts (i think).

Did get some info from lj10.com
Top
Posts: 172
Joined: Sat Jul 10, 2004 6:47 pm
Location: sitting on the back seat of the bus licking your sisters hairy minge

Re: G10A into LJ50

Post by Jock »

ricky1970 wrote:Anyone done this conversion?

If so-
How did it preform, on road and off? Economy?

Any nasty suprises to look out for?

How tight a fit is the Sierra 5-speed in the LJ tranny tunnel?
TOO tight and will not fit without chopping

Could you close the bonnet without modifying it or a body lift?
NO unless you cut the bonnet or get a LJ80 bonnet

Would you do it again?

Weighing this conversion against a 3/4K toyota, which after reading a lot of posts, looks to have too many drawbacks.

Rick
You could fit this three cylinder engine and mount it in the front of the engine bay keeping the bell housing out of the tunnel but then you will have trouble with the clutch fork fouling on the steering box.

strolla motors are good but they are a way dodgy fit in a LJ50. TOO much be modified. I would go the G10 conversion any day personally. Much better engine and its alloy not a cast iron nugget
[quote="sheps"]
When was the last time you correctly spelled a motor into a car? The people that should stay away from spanners are pedantic English teachers & keyboard spelling nazi's.[/quote]
Top
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

Just build the 50 motor :cool:

triple mikunis, tuned expansion chambers & a good porting job and you'll drive away from any but the best 4 stroke conversions :cool: :lol: :armsup:
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests