Currently doing some research on what the options are for an auto box behind a P76 motor in a Hilux. As I'll be running 38's I'll need some options in transfer gearing or dual cases. Im sure that there is a Rover box/ transfer combination that will suit the motor without mucking around with Bellhousings etc.
Cheers
Pete
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What auto box behind 4.4 P76 motor
Moderator: Micka
Yep - ZF 4 speed to LT230 transfer is a straight boltup with a different adapter that goes between the end of the crankshaft and the flexplate (different compared to the adapter that the stock rover motors use.)
Lt230 has 3.3:1 low range and is a full time 4wd with centre diff lock. Both front and rear outputs are on the drivers side so you may have to run a bundara rear diff??
Sam
Lt230 has 3.3:1 low range and is a full time 4wd with centre diff lock. Both front and rear outputs are on the drivers side so you may have to run a bundara rear diff??
Sam
Who is online
Users browsing this forum: No registered users and 1 guest