Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
txzuk1988 wrote:mighty kong has worked well. I wanna flat belly though so i hate to cut it up. I have improved with the welder and will probably sell the mighty kong and make a custom one with a roctoy ring
I am doing another big run of the Roctoy Rings this week, for those who are interested.
iv decided to build my own new braces out of 6mm 75x75 angle. will be similar to the original mount with alot more gussets and braces. it will be trimmed in some ares to make it more compact. will get some pics when i start to play
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
iv decided to build my own new braces out of 6mm 75x75 angle. will be similar to the original mount with alot more gussets and braces. it will be trimmed in some ares to make it more compact. will get some pics when i start to play.
do you guys think this might work?
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
The reason why the cases crack with the stock mounts is because it's a two piece design and it flexes on them. Make a solid one piece mounting design and you'll have no problems.....or you could save a butload of time and effort and get a rocktoy ring or similar.
