Tech Talk for Suzuki owners.
Moderators: lay80n , sierrajim
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Thu Jan 15, 2009 4:42 pm
ive managed to spring the thread in which the bolt goes into to hold the spedo cable to the tcase. im thinking of just redrilling and taping to m6?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 1477 Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong
Post
by jimbo jones Thu Jan 15, 2009 5:27 pm
hellie coil it
current truck, 105 series GXL diesel 6" springs & twin pro lockers
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Thu Jan 15, 2009 6:17 pm
jimbo jones wrote: hellie coil it
what?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 5062 Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland
Post
by ofr57 Thu Jan 15, 2009 6:20 pm
[color=green]Vote Earth[/color]
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Thu Jan 15, 2009 6:32 pm
where do i get a set? and is it worth it?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 1477 Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong
Post
by jimbo jones Thu Jan 15, 2009 6:34 pm
any engenering shop should sell em about $20 a kit I think
current truck, 105 series GXL diesel 6" springs & twin pro lockers
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Thu Jan 15, 2009 6:36 pm
do you know the size of the bolt and thread?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 176 Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth
Post
by scooby_74 Thu Jan 15, 2009 10:05 pm
M6x1.0 is what you need, not a good idea to drill and resize the bolt has a small point on it to locate the cable better using the correct bolt with heli coil
93 NJ,5 speed,2" body lift,32" muddies
Posts: 5062 Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland
Post
by ofr57 Thu Jan 15, 2009 10:27 pm
plus if you stuff it again you dont have to keep going to bigger size bolts
[color=green]Vote Earth[/color]
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Fri Jan 16, 2009 10:30 am
does anyone know what thread type and size the bolt is?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 265 Joined: Mon May 02, 2005 9:54 pm
Location: NEWY
Post
by weaves Fri Jan 16, 2009 4:00 pm
i sell recoil kits at my work.
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Fri Jan 16, 2009 4:05 pm
yer im going to heli coil it but i dont know what size bolt it is. i dont have the case with me as it away getting fixed
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 810 Joined: Tue Jul 08, 2008 8:40 pm
Location: vic
Post
by ajsr Fri Jan 16, 2009 4:21 pm
brendan dude as two people above have said its
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 835 Joined: Fri May 05, 2006 4:56 pm
Location: Sydney
Post
by brendan_h Fri Jan 16, 2009 4:36 pm
o sorry thanks
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Users browsing this forum: No registered users and 1 guest
