Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU 2 door, no lift, need new tires...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

GU 2 door, no lift, need new tires...

Post by DiscoDino »

Hey all,

Rather than investing in a Land Rover again, I decided to go for the Patrol GU 2002, with the 4.5 carb (petrol cheap in KSA), and no electrics...

Anyways, after only 12,000 km, the original tires, 235/80 Bridgestone HT are badly worn to my dissappointment ( :P ), therefore they are to be replaced with something more to my likings for the desert here.

The wheels are the original 6x16. I have no idea what offset they have, but was wondering if I can go with 8.25x16 XS or 255/85 R16 without any lift. There are no flares on it.

I need this truck to remain stock for the time being, until I finish the Disco.

Thanks for all the input...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

over here the GU's have 8x16 wheels with 265 70 16 [265 75 16 on the ute] and plenty of guys use 285 75 16 with minimal rubbing on full compression.
this is on wagons though so if your talking about a SWB we dont get them in australia and cant tell you if they fit.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

heres a pic of a GU shorty
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
JK
Posts: 3229
Joined: Tue Oct 22, 2002 9:00 am

Post by JK »

big red wrote:heres a pic of a GU shorty


:cry: why can't they bring them out over here?!?!
Top
A1zook

Post by A1zook »

FUK i had been told bout these but that is awsome i want 1 nah make that 2 has that image been photo chopped on that dune or wat man that would be insane with lift lokka s n a set of 37"s
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

According to Nissan, there isnt enough market here for them.. The price wouldnt be that much different to the LWB, so they figure most would go with the long wheel base...


I actually had a mail session going with Nissan on this as I wanted one!! They have zero chance of importing them, even in small numbers.
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

In Saudi, the bone-stock SWB seels for ~6,000 $ US less than its LWB counterpart, so that is a considerable amount...

I for one did not like the ~117" wheelbase of the LWB, with prior experience with my 100" Discovery WB, I wanted something around that, and the Patrol SWB is great for that.

It is a shame that you guys cannot get any, i can only imagine what you can do with it!!!

I plan on modifying it in a year's time, so will be looking onto your expertise, advice and help...so start packing them up...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

you can get GU shorty's from new zealand. :D
Top
A1zook

Post by A1zook »

Yeah But wats involved in gettin em ova here do u know Carlton cause i would luuuuuuuuuvvvv to have 1
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

I don't know. But I think we have free trade with new zealand so there would be minimal duties and tax and stuff. They are pretty cool, hey?
Top
Posts: 79
Joined: Fri Nov 08, 2002 8:23 am
Location: Melbourne

Post by Rut Slut »

I know of someone that was looking into bringing in a second hand GU SWB from NZ. From memory it was going to come out at about $35000.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

I think it will be a worthwhile venture in a few more years when they have been around a bit longer and the prices come down.
Top
Posts: 79
Joined: Fri Nov 08, 2002 8:23 am
Location: Melbourne

Post by Rut Slut »

From memory it will cost between $5000 - $10000 to get it here and registered, depending on what needs to be done.

Would be an awsome truck though. :D
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Well, since I will be modifying it soon, what do you guys recommend I do?
Tires, lift, gearing, lockers, bumpers, winches...??? which ones, and why?

Thanks
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

All of the above. :D
In pretty much the order that you listed them, too!
Cool truck :twisted:
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

BTW, dude, is the GU shorty still a 2400mm wheelbase??
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

i want a shorty GU

DAMN that thing is COOOL

i wanna do a cheezy look on it though, short cab ;)
hands and mums dont count!!!
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

DiscoDino wrote:Well, since I will be modifying it soon, what do you guys recommend I do?
Tires, lift, gearing, lockers, bumpers, winches...??? which ones, and why?

Thanks



Well Disco, before we offer advice on setup for your machine, tell us what the terrain is like over there.
Obviously we would imagine it to be big bloody sand dunes with oil rigs to dodge between but like anywhere one setup won't be ideal for
all types of terrain
Cheezy would vouch for this as his rig is almost one of a kind when compared to other competition rigs in Victoria. This is explained by the fact that he prefers rocks to drive on but Victoria is full of mud.
Totally different conditions require different approaches.
Tell us what its like over there and we will give you a HEAP of ideas!! :wink:
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Well, In Saudi, its 90% sand and 10% rocks, so most probably any AT tire in 37" form will do that trick, or I will go with the 37 MTR as an all rounder...
I like ARB products, so that is the way I would go, also OME, Warn, the usual good stuff...
I would love to do anything radical to tell you the truth, so shoot ideas, i'm all eyes!
:D
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Hi Dino,

I just realised that in your first post in this thread you used the words 'invest' and 'Rover' in the same sentance. Are you on drugs? :lol: Just kidding!

Do the NZ GU shorties come in diesel? Me thinks that a TD 3.0 would rock!
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

tooker, dude, if you bring two back, i will pay half for one :D
hands and mums dont count!!!
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

2car...yeah, I actually said that...well, I will not comment on that, since it will backfire on me... :oops:

The GU SWB does come in diesel, but living in Saudi, petrol is way cheaper, and the diesel they have here is not "clean" enough for small engines, so I decided to go for the 4.5 carb.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

they actually have carbies on em still? :?
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 37 guests