Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5lt windsor in landcruiser (what carby)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 40
Joined: Tue Jun 05, 2007 10:07 pm
Location: Somewhere in the bush or snow

5lt windsor in landcruiser (what carby)

Post by Ausi fj »

Hi, I need help to find out what is the best size Holley carby to run on a mild 302 windsor on gas. The motor is going into my fj45 landcruiser. thanks
4x4 Addict. 2002 Patrol, 1977 Fj45, 1975 Fj40, 1993 Vitara, 1983 Sierra Off Road Buggy
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

I'd say roughly about a 600cfm would be more than enough for what you need. Are you planning on spending much time on petrol?
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

deoends what you want out of it. a 600 is the upper limit on a stock 5L.
a 450mech or 465vac will loose out only slightly in high rpm power, but low end and drivability have the potential to be greatly improved
http://www.mothfukle-engineering.com/
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

If petrol is your back-up fuel supply for when you can't get gas, maybe the simplest and least breakable is the way to go. Just a thought to throw into the mix.
This is not legal advice.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Do you want to maximise the torque or go for outright HP?
If you want all out power go a 600 or 650 (holley). Vac sec if its manual and Double pumper if it's an auto.

If you want torque a 500 two barrel(holley) will be plenty.

Jas.
Top
Posts: 40
Joined: Tue Jun 05, 2007 10:07 pm
Location: Somewhere in the bush or snow

Post by Ausi fj »

I am wanting torque not speed and gas will be used most of the time. I have had the heads rebuilt for gas and I am puting in a mild stage 1 cam. It is being bored 0.030 over, it will also run 4 into 1 extractors and have a five speed box behind it. The ute has 35" tyres.
4x4 Addict. 2002 Patrol, 1977 Fj45, 1975 Fj40, 1993 Vitara, 1983 Sierra Off Road Buggy
Top
Posts: 242
Joined: Wed Mar 19, 2008 10:56 pm
Location: Brisbane

Post by stockhorse »

My personal preference would be an original Carter,far less trouble and far easier tuning than a Holly going over any rough ground.A Holly won't give you anything the Carter can't in this particular application.
Top
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

i would think as your after torque tri-y's would be better extractors to use.
4 into 1's are generally for higher reving power applications.
Top
Posts: 292
Joined: Wed Jan 11, 2006 11:49 am
Location: Seville Vic

Post by MICK77 »

A Quadrajet is a far better carby than a Holley. Easier to tune, easier to repair on the side of the road if you have to.
If you were running on petrol with a Holley, you might as well fit a garden tap and a 44 gallon drum of fuel on the roof.
[quote="bogged"]
Whats that old saying that I've modernized for this scenario
"fuked over once, shame on her, fuked over twice, shame on me."
(c) Bogged 2008[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests