I have a nl swb there is vibration at approx 80klms when slowing down I have replaced the rear uni joint but noticed there is a lots of play in the
cv joint coming out of the transfer case.
Has anyone found where to by this item as repco,etc do not have
a listing for them.
Mitsi want $1080 for a complete prop shaft(don't sell cv separate).
I think balance is ok(no weights missing,has'nt taking a hit).
Any help would be great.
Darren.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vibration
Moderator: -Scott-
I think they come pre built with play in the joint there - mine has plenty of play as well but it doesn't leak so I'll leave it alone. Most I ahve seen have a bit of play there.
I have a vibration which starts about 80 km also.
I have a vibration which starts about 80 km also.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
Mine had the same. Replaced the extension housing out of the transfer case and it improved. I also replaced the gearbox mount (the main one) as it was sagged and the little support mount on the LHS was sitting hard against itself and this fixed the problem. There are aftermarket mounts available but the housing is OE.
Who is online
Users browsing this forum: No registered users and 18 guests