Hi all, i have just replaced my alternator in my 1uz powered hilux with a camry 70 amp alternator. my problem now is there seems to be to much load on the alternator and causing the 5 rib drive belt to squeel and destroy itself after replacing the belt i started it up again and pulled the plug from the back of the alternator and the squeeling stopped.
What could be my problem ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
alt problems
Moderator: -Scott-
just how tight did you make the belt? I would expect significant load on any alternator after start-up, enough to create slippage if the belt isnt tight enough. Made sure that there are no oils or other contaminants on the belt or pulley?
Have you checked output from the alt to make sure that its working? (ie wiring isnt mixed up)
Have you checked output from the alt to make sure that its working? (ie wiring isnt mixed up)
Who is online
Users browsing this forum: No registered users and 1 guest