Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Seats

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

The "rat trap" mount on the passenger's side is something I want to get rid of. I don't think it would hold up very well in a crash, or even in a comp or heavy offroading situation for that matter.

OK a few more pics...
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

The seats were not exactly a bolt on but they're pretty close.

The distance front-to-back between the mounting holes were the same as the zook, but the rails ended up about 50mm further apart. I got some 50mm x 10mm aluminum flat bar and bolted that the the seats and then bolted the rails to that. I like how it lifted them up a little but that might not be the best for those taller ppl among us (i'm about 180/5'10")
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

greg wrote:Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?


Wait - i've just confirmed that you also have Carpet in there? Don't you people have rain / mud / dust / dirty shoes / dogs / grubby children in queensland?
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Not at the local shopping centre with undercover parking ... :D

But in all honesty ..I have only just removed the carpet from the footwells of my Zuk ... will most likey pull the rest and teh put come of that rubberized HD paint in goop ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

greg wrote:
greg wrote:Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?


Wait - i've just confirmed that you also have Carpet in there? Don't you people have rain / mud / dust / dirty shoes / dogs / grubby children in queensland?


They were pretty good value, and they look clean coz i got them shampoo'd recently (about $28 from memory)

I got these when I was daily driving this thing, so I wanted comfort. I don't like mud and try not to get into that kinda thing too much. I have no kids or pets :D

I do expect them to get a bit dirty, but for what I do they are great. Some canvas covers would be spot on, but dunno if the $$$ would be worth it.

EDIT: Forgot to mention, I have a fibre top and cap off a Maruti that I usually run on the ute, so it keeps most of the sh1t out. When I did the rust in the floors I also made sure that all the little holes were plugged, so carpet should stay reasonably dry, unless i'm trying to do a remake of 20,000 leagues under the sea... :roll: :lol:
Last edited by Damo on Thu Jan 22, 2004 3:50 pm, edited 1 time in total.
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

greg wrote:
Damo wrote:And what better to win the crowd over with, than PICS!!!! :D

So I went downstairs and snapped a few of my seats. Here we go...


Ouch man!!!!!

My cornias are burning - too much bling!!!!!

:shock:


Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?



you want bling.........check out my very tasty pair of swift gti seats.
and the stomach acid orange paint - gauranteed to burn a hole in anyone's retina - well that's what it said on the paint can... :finger: :finger: :D :D :D
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

greg wrote:
Damo wrote:And what better to win the crowd over with, than PICS!!!! :D

So I went downstairs and snapped a few of my seats. Here we go...


Ouch man!!!!!

My cornias are burning - too much bling!!!!!

:shock:


Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?


And whats worse he's drinking Midstrength
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

turps wrote:
greg wrote:
Damo wrote:And what better to win the crowd over with, than PICS!!!! :D

So I went downstairs and snapped a few of my seats. Here we go...


Ouch man!!!!!

My cornias are burning - too much bling!!!!!

:shock:


Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?


And whats worse he's drinking Midstrength


To quote Chopper Reid, "Whinge, whinge f*ckin whinge"

There are XXXX Gold tins there too :D

At least they're beer cans, unlike the cocktail glasses found around Turps' workshop :finger:
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

love_mud wrote:What roof lining .. your a soft top biatch :D


as well as a hose out cabin .. as lest face it .. I am still a mud pig after all these years .. why fight it ... :D


Ok.... roof fabric then.... Whatever


I dunno if it's from having to climb out the soft top to attatch the snatch strap or just flung through sunroof area or drivers window





As for ditching carpet to hoseout I still dunno why you didnt do that years ago.....

I had my new power steering box on the floor for a week until all the fluid came out.... pull the plug and a few doughies and it's all gone :D
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Damo wrote:
turps wrote:
greg wrote:
Damo wrote:And what better to win the crowd over with, than PICS!!!! :D

So I went downstairs and snapped a few of my seats. Here we go...


Ouch man!!!!!

My cornias are burning - too much bling!!!!!

:shock:


Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?


And whats worse he's drinking Midstrength


To quote Chopper Reid, "Whinge, whinge f*ckin whinge"

There are XXXX Gold tins there too :D

At least they're beer cans, unlike the cocktail glasses found around Turps' workshop :finger:


You make me laugh, plus there crownies at the moment. As for the cocktail glasses there's none of them the girlfriend has moved onto cruiser lolloy drinks this week. SO :finger:
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Crownies? :rofl:

VB in a poofy bottle with a gold label :finger:

Well, not quite but fark if that's not the most overrated beer i don't know what is.




errr, Grimbo? Did we get off topic again? :D :lol:
Posts: 216
Joined: Sat Jul 12, 2003 5:48 pm
Location: Gold Coast QLD Rig: '90 Zook WT

Post by jabtronic »

Yeh.. thanks guys for posting the pics of the seats, well I guess the R33 seats should squeeze in then :)
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

agreed. crownies are teh shite!
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Regardless of which beer is the best, i still reckon you should stop drinking them damo and start thinking about pretending to get ready to get started preparing to get organised to buy what's needed to get the jobs done that are required to finish that bloody truck of yours!!!!

;)
DMA Founding Member #1 - Now Retired
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

greg wrote:Regardless of which beer is the best, i still reckon you should stop drinking them damo and start thinking about pretending to get ready to get started preparing to get organised to buy what's needed to get the jobs done that are required to finish that bloody truck of yours!!!!

;)


:drinking: hehehe

Funny you mention that Greg! I'm just about to head out and find me a new grinder. Got some news from Qld Trans this week too, though not everything I need :roll:

I think someone should just kill this thread, there is no hope for it now!! :shock:
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Damo wrote: Got some news from Qld Trans this week too, though not everything I need :roll:


And that news was?....

in other seat-un-related topics - how are the baby swampers going? Are they noticable in such a baby size?
DMA Founding Member #1 - Now Retired
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

OK, consider this thread officially hijacked for all time. It cannot be recovered, there is no turning back. Do not pass go, do not collect $200.

:finger:

News from QDOT was body lift is approved, and everything else (EXCEPT the suspension) is OK pending an inspection.

Still waiting on news on suspension.

Regarding the baby swampers, yes they are small. They are worn and ride on the road worse than anything except perhaps a timber and iron spoked wheel from some ye olde cart/dray. Have only driven it a few k's on road so far, no real plans to take this one offroad. Swampers are there purely for the 'cred :D bling bling! :finger:

Seriously, it'll be rolling on stockers shortly :oops: swampers might make some good sand tyres...
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

That's good to hear mate - so i guess it will only be a year or two til it's back on the road then :lol:
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Damo wrote:OK, consider this thread officially hijacked for all time. It cannot be recovered, there is no turning back. Do not pass go, do not collect $200.

:finger:

News from QDOT was body lift is approved, and everything else (EXCEPT the suspension) is OK pending an inspection.

Still waiting on news on suspension.

Regarding the baby swampers, yes they are small. They are worn and ride on the road worse than anything except perhaps a timber and iron spoked wheel from some ye olde cart/dray. Have only driven it a few k's on road so far, no real plans to take this one offroad. Swampers are there purely for the 'cred :D bling bling! :finger:

Seriously, it'll be rolling on stockers shortly :oops: swampers might make some good sand tyres...


if it got back from my arse being branded with a seatbelt whilst wearing a pair of speedos ... it can come back from this easily ..

I have stock fgabric suzuki seats in mine .. and I reckon they are purdy comfy ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

love_mud wrote:I have stock fgabric suzuki seats in mine .. and I reckon they are purdy comfy ...


I've got stock vinyl seats in mine and i think they are pretty good too... though there is a slight tear in the drivers side one so i get a tad wet when i sit in it after heavy rain :?

:)
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

greg wrote:
love_mud wrote:I have stock fgabric suzuki seats in mine .. and I reckon they are purdy comfy ...


I've got stock vinyl seats in mine and i think they are pretty good too... though there is a slight tear in the drivers side one so i get a tad wet when i sit in it after heavy rain :?

:)


A mate of mine makes up boat covers etc .. he has just got himself his one giga enormous sewing machine .. He could most likley make up some vinyl or canvas seat covers for a pretty reasonable sum if needed ... Your seats would be the same basic shape as mine but without the headrests one would assume ...

Would you like me to find out if he is interested ???
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

love_mud wrote:A mate of mine makes up boat covers etc .. he has just got himself his one giga enormous sewing machine .. He could most likley make up some vinyl or canvas seat covers for a pretty reasonable sum if needed ... Your seats would be the same basic shape as mine but without the headrests one would assume ...

Would you like me to find out if he is interested ???


Thanks mate, but in reality - i like my car looking all crappy and run down (besides the bling gauges on the dash of course)...

However, once i get the pretty winch mounted up i may get back to you as i'm considering a little press-stud type cover for the winch to keep it a little bit cleaner :idea:

Oh - i reckon you could use a boat cover for yours though - since it sees so much water :P
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

greg wrote:
love_mud wrote:A mate of mine makes up boat covers etc .. he has just got himself his one giga enormous sewing machine .. He could most likley make up some vinyl or canvas seat covers for a pretty reasonable sum if needed ... Your seats would be the same basic shape as mine but without the headrests one would assume ...

Would you like me to find out if he is interested ???


Thanks mate, but in reality - i like my car looking all crappy and run down (besides the bling gauges on the dash of course)...

However, once i get the pretty winch mounted up i may get back to you as i'm considering a little press-stud type cover for the winch to keep it a little bit cleaner :idea:

Oh - i reckon you could use a boat cover for yours though - since it sees so much water :P


hey I resemble that ... :oops: actully mine could use more of a dust cover .. as it rarely bloodywell moves ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

turps wrote:
Damo wrote:
turps wrote:
greg wrote:
Damo wrote:And what better to win the crowd over with, than PICS!!!! :D

So I went downstairs and snapped a few of my seats. Here we go...


Ouch man!!!!!

My cornias are burning - too much bling!!!!!

:shock:


Seriously though Damo - a soft top, with bling seats - isn't this just going to end in tears?


And whats worse he's drinking Midstrength


To quote Chopper Reid, "Whinge, whinge f*ckin whinge"

There are XXXX Gold tins there too :D

At least they're beer cans, unlike the cocktail glasses found around Turps' workshop :finger:


You make me laugh, plus there crownies at the moment. As for the cocktail glasses there's none of them the girlfriend has moved onto cruiser lolloy drinks this week. SO :finger:



Damo, time to get your digicam out and take a pic of our pile of empties. would make a nicer sight than turps' lolly water drinks.
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Yeah I'm after some GTi seats. Just sick of scalding my a$$

Looking at getting them scotchbrited or whatever to protect them
Gone drag racing......
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

What are you talking about scotchbrited. Your suppost to drink the scotch not spill it onto the seats.

Unless your turps then you would spill the scotch reaching for the girly drinks!!

Suppose it would cool the belt down so you don't burn your rear end when your on the back seat with yah pants down :lol: :lol: :lol:
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

i plan on puting some obx race seats in my zook i will post pics when im done


they are 330 each which i think is good value
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

DeWsE wrote:What are you talking about scotchbrited. Your supposed to drink the scotch not spill it onto the seats.

Unless your turps then you would spill the scotch reaching for the girly drinks!!

Suppose it would cool the belt down so you don't burn your rear end when your on the back seat with yah pants down :lol: :lol: :lol:


Those weirdos from sydney will do anything for kicks ... unlike the guys from Vic SA and WA .. we go 4 wheeling for fun ... :D :finger:
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 169
Joined: Tue Sep 23, 2003 1:37 pm
Location: New Zealand home of the warriors

Post by Luigi Malone »

My wifes ride is a 96 swift Gti, I don't think the seats are comfy at all. They are better than stock Sierras, but not that much.

I fitted Toy MR2 seats, narrow and verr adjustable, verr comfy. $200 the pair.
Passenger side took a bit of work with 2x2" steel tube to get the seat raised up enough. Drivers was nearly a bolt in, just used some flat 2x2 to go between the front seat mount holes and the front bolt holes in the original mount holes..
LM
It's better to have LIVED for a day than to have EXISTED for a hundred years.
Posts: 216
Joined: Sat Jul 12, 2003 5:48 pm
Location: Gold Coast QLD Rig: '90 Zook WT

Post by jabtronic »

Well I got the Skyline seats and the rails are a tad too wide and the seats sit pretty low. Would require a fair bit of modification to make them fit so I'm not going to bother. If anyone wants them ($250 for both) PM me.
Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests