Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Best immobilisation points for G13B (carby)

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Best immobilisation points for G13B (carby)

Post by Moph »

Fitting an immobiliser to the Zook at the moment. What are my best immobilisation points on a carby motor with mechanical fuel injection??? The alarm has 2 point immobilisation and I have to use both immobilisation points for when I move to Perth (2 point immobilisation required and inspected before they'll tranfer rego).

Thoughts so far are:
1) Relay to activate carby fuel cut-off solenoid (but not sure if this only does the idle jet...?)
2) Relay to cut 12v feed to coil (patch in behind fuse box - pretty easy to get past though)
3) Relay to connect coil to earth when the immobiliser is armed, so that if they do get the starter turning over the coil will just earth to the chassis rather than through the leads - ie no spark

Any ideas?
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Do more than one point, do both the coil, starter and fuel cut. If they want a car, theives will get it regardless of what system it has on it. But by making it harder and more time consuming, you are upping the chances of them either giving up or being distrubed/caught.


Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 191
Joined: Sat Jul 28, 2007 12:43 pm
Location: Vic

Post by 86slowsierra »

my old one used to cut the power to the coil and starter.
[quote="v840"]Her:"Awww thats so sweet I love a man who is in touch with his blah blah blah"

You:"Giggidy."[/quote]
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

take the coil wire with you :)
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

disconnect the fuel hose.
;)
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Leave it at macdonalds, safest zook parking there is :lol:
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

take the carbon brush out of the inside of the dizzy cap, it's so small you wouldn't know it was missing.
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Thanks guys ... reeeeeal helpful :)

Spotted you at Morgan on the weekend Atari - panel vanned windows looks the shizzle :cool:
Posts: 179
Joined: Sat Jun 14, 2008 9:43 pm
Location: Shidney

Post by RockHopper »

If you're looking for two points, it'll usually be a relay for the starter motor and a relay for the ignition coil on a carby type engine.
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

I'm thinking that the starter motor is the first place everyone looks so it's probably the least useful cut point. Plus I'd rather that it turned over but doesn't start (no ignition) - far more difficult to track down no ignition than no starter.

Hell, a lot of Zooks turn over and don't start without an immobiliser fitted!! How would a thief ever tell the difference?!? :D
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

Moph wrote:Thanks guys ... reeeeeal helpful :)

Spotted you at Morgan on the weekend Atari - panel vanned windows looks the shizzle :cool:
dude, where were you, what were you in, ya should have come over & said g'day?
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Nah mate didn't have time - drove past at noon on my way up to Waikerie, and came back at 9pm. Wasn't stopped in Morgan or I would have :)
Posts: 145
Joined: Mon Jul 23, 2007 9:54 pm
Location: perth WA

Post by lexplay »

black with white tracer wire. but any one can hotwire a carby zook with a coathanger or one wire. lol
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

if is a requirement i would go with the coil and well u would pretty much have to go starter motor, but take the starter motor one off once u have got rego so theifs think the car is broken down...
also run your fuel line into your car or under it close to where u sit and put a valve on it which when u get out of the car u close the valve so the only petrol that goes in the motor is what is already in the carby and in the line past the valve, its funny when if a thief does get it started they only get 100 meters down the road and break down, then they leave the car cause they think its a piece of crap!!
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

lexplay wrote:black with white tracer wire. but any one can hotwire a carby zook with a coathanger or one wire. lol
That's kinda the point of an immobiliser - to stop it being a one-wire job to hotwire them ;)

Not keen on manual intervention like a fuel cutoff valve. Just looking to kill the ignition system at multiple points to make it difficult to get started.
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

ppl can get through all the cut off's on a carby car easily by HOT wiring a wire from your coil to your battery- and another to your starter motor to bypass these.. fuel cut off is best idea cause if they do get through the electrical imobilisation they have no fuel
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

just leave the stock sierra carby on it...they won't get far!.....
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

I did the starter motor and coil wire, make sure you tape everything up into looms to make it a bit harder for them.

I reckon having a lock on the Tcase for neutral would be good too...
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

For the kids who steal one for a joyride, just leave the transfer in neutral, they may not know 4x4's.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

Post by waandy »

PJ.zook wrote:For the kids who steal one for a joyride, just leave the transfer in neutral, they may not know 4x4's.
i thought mine got stuck in neutral one day..... till i realised the axle was hanging a foot outa the diff when i got out to scratch my head.
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

weld a lug to the gearstick and one to the T/case shifter.
Cable and padlock between the two. They wont get far in low/reverse.

I hate "kill switches" they always seem to act up at the worst possible time.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 27
Joined: Thu Jan 01, 2009 4:57 pm
Location: Australia

Post by zookeenie »

Rotor Button In Pocket....has worked for me every time!
sierras....There Boxy But There Good
Slow....4Low.....And Up We Go!
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

zookeenie wrote:Rotor Button In Pocket....has worked for me every time!
How many times has someone attempted to steal it ?

I locked the doors and took the keys out.. worked for me every time to.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests