ARB's

[gmogger]

I'm after an arb for the front of my 1996 gq patrol.

does anyone know what the differance is between a rd136 and a rd04

Both are for 31 spline h233's but one is nearly double the price of the other?



Dan

[3.8BUNDY]

The world’s most highly regarded traction aid, an ARB Air Locker is a driver controlled locking differential originally designed to give serious 4 wheelers the traction needed to combat extreme off road terrain. When extra traction is required, the driver activates the Air Locker via a convenient dash mounted switch. Pneumatic pressure supplied by an on board air compressor engages ARB’s patented locking mechanism within the Air Locker, thus preventing the wheels from turning independently. The Air Locker is deactivated by flicking a switch, returning the differential to normal.

Nissan Frontier/Xterra/Pathfinder Axle Description Shaft Spline Ratio Part No.
1986 On Front R180A, 4 Cyl. 27.8 (1.09") 27 All N/A
1986 On Front R200A, 6 Cyl. 30.4 (1.20") 29 All ARB-RD107
1986 On Rear H233B, 31 spline, 6 Cyl. 32.4 (1.20") 31 All ARB-RD092
1986 On Rear H233B, 33 spline, 6 Cyl. 33.3 (1.31") 33 All ARB-RD242
1986-97 Rear C200, 29 spline, 4 Cyl. 30.4 (1.20") 29 All ARB-RD1071,2
2002 On Rear C200, 31 spline, 32.0 (1.26") 31 All ARB-RD106

Nissan Patrol GQ Axle Description Shaft Spline Ratio Part No.
1988-98 Front H233B 32 (1.26") 31 All ARB-RD09
1988-98 Rear H233B, rear disc brakes 33.3 (1.31") 33 All ARB-RD17
1988-98 Rear H233B, rear drum brakes 33.3 (1.31") 33 All ARB-RD24
1988-98 Rear H260, leaf sprung cab chassis & utility 38.4 (1.51") 37 All ARB-RD70

Nissan Patrol GU Y61 Axle Description Shaft Spline Ratio Part No.
1998 On Front H233B 32 (1.26") 31 All ARB-RD78A
1998 On Rear H233B 'small' 33.3 (1.31") 33 All ARB-RD172
1998 On Rear H260 'large' 38.4 (1.51") 37 All ARB-RD712

Nissan Patrol MQ Axle Description Shaft Spline Ratio Part No.
1979-88 Front C200 30.4 (1.20") 29 All ARB-RD107
1979-88 Rear H233 32.0 (1.26") 31 All ARB-RD04
1979-88 Rear H260 38.4 (1.51") 37 All ARB-RD70

1 Only suitable for differentials with 12mm crown wheel bolts.
2 Refer to dealer or check spline count to determine axle type.



Looks like the rd04 is for an MQ, which I would say being less popular and more expensive.

[in24bn]

the rd 136 is the new locker brought out by arb . there are new o rings in there compared to the old lockers . the new ones have had the o ring machined down so the bearing does not interfer with the seal . an its operated on the oppisate side compaired to the old one . got one in my gq and have had no dramas with it

[gmogger]

the rd 136 is the new locker brought out by arb . there are new o rings in there compared to the old lockers . the new ones have had the o ring machined down so the bearing does not interfer with the seal . an its operated on the oppisate side compaired to the old one . got one in my gq and have had no dramas with it

Which one have you got the old one or the new?

Has any one suffered an old type one failing?

[in24bn]

ive got the new one but the problem with the old one is that you had to press a bearing over a machined finnish then the o ring had to seal it . it use to chew out the o ring

[Leeroy]

That list was pretty out of date. They stopped making RD09s (only difference with RD78A was thrust block in the middle, which you do or don't use depending on if it's in GQ or GU), now I think they've turfed they RD78A as well.

As stated the 136 has it's seal housing and everything on the opposite side of the diff now. Whether that's a good thing only time will tell. I've never seen an O ring get "chewed out" by a bearing... Ashbilt has fitted about a million of them he may have an opinion.

Ash fitted my front (RD09) and rear (RD24) and have never had any grief with them.