I need a set of ignition leads for the vitara, could only find a bosch set at super cheap and they were for a swift at $ 84.00
Any clues as to what brand to get and what to pay, $84.00 sounds like a hit to me, surely people arn't paying $20 a lead !
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HT ignition leads for 92 vitara 1.6i
Re: HT ignition leads for 92 vitara 1.6i
Possibly for the twin cam motor.rustyvit wrote:I need a set of ignition leads for the vitara, could only find a bosch set at super cheap and they were for a swift at $ 84.00
Any clues as to what brand to get and what to pay, $84.00 sounds like a hit to me, surely people arn't paying $20 a lead !
cheers
I had bosch leads and they cost about $40 or so from memory, really good boots on them, sealed well.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Just put some Top Gun leads in the 92 16V EFI model, it has the long boots that go down into the head. Yes they are expensive because of the long boots on the end. Couldn't say price bro got them from AutObarn for me as he works there. Its worth doing spark plugs whilst your there to.
Prt No. TG4489
Prt No. TG4489
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
yeah use bosch....then find when you pull the lead out the plastic end is stuck to the spark plug....seen it way too many times. the best are ngk, but they are around a 100 bucks. you get what you pay for.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Yes spent many hours digging out plastic bits with a scribe and vacuum cleaner with a smaller hose taped to it, I think that problem happens with most brands if not replaced often enough.joeblow wrote:...then find when you pull the lead out the plastic end is stuck to the spark plug....seen it way too many times.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Yep did that today, prick of a job digging out the ends, prick of a set up really, my other vitara has champion leads and the rubber ends are long gone, much easier to work on.MUD-PIGSIERRA wrote:Yes spent many hours digging out plastic bits with a scribe and vacuum cleaner with a smaller hose taped to it, I think that problem happens with most brands if not replaced often enough.joeblow wrote:...then find when you pull the lead out the plastic end is stuck to the spark plug....seen it way too many times.
Who is online
Users browsing this forum: No registered users and 3 guests