Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

adjusting trailing arms

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

adjusting trailing arms

Post by j-top paj »

anyone got any ideas on how to adjust my trailing arms?
either on the vehicle or off


Image


i tried with them on the GU still but didnt have the strength/weight to "crack the nuts...
obviously the bushes provided some play in it but even when i had it as far as it could go i still didnt have enough to crack them..

anyone got any ideas???

already been soaked in WD40 for a while so far
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

what are you using, just a big shifter. have you tried a large bar on it for extra leverage?
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

big shifter plus big pole (about 2foot) as leverage

leverage was tried about 5mins after it didnt crack with just the shifter (18" or so)
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

the problem im having is the bushes...
im not very heavy so i can get them to the point where they dont flex any more but then i dont have the weight to move them further :oops:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 751
Joined: Tue Jul 24, 2007 8:55 pm
Location: GlassHouse Mountains

Post by taps »

Try using some wurth brand rostoff, then get it on a hoist and get a pair of stilcens with a length of pipe 4 - 5 ft and have a real go.
:x
YOUR 4X4 ACTION
personalized 4x4 d.v.d's
"Let us capture your action" [url=http://au.youtube.com/watch?v=QefnzCt975c][b]Click Here To View Our Video Trailer[/b][/url]
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

i would lock one up with a shifter and bar against the griound

and lean on the other one.

One will be a left handed thread, the ones with the marks on the hex's Your not trying to turn this one the wrong way right?
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

the problem im having is if i use too much leverage then im to scared to leave the diff on the jack or stands..
with the shifter and pole i could already feel the car moving a little..
3T worth of patrol i dont want getting stuck on the driveway that i cant move :oops:



if i could get a hold of my 31s then id stick them back on as a backup
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

Shadow wrote: the ones with the marks on the hex's Your not trying to turn this one the wrong way right?
nah definately got them going in the right direction... just dont have enough weight to crack them..



got a mate coming over in the morning that has a few KG on me so will see how we go :armsup:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

Use a floor jack under the shifter?
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

WRXZook wrote:Use a floor jack under the shifter?
that was tried, but i could see the car lifting so thought i better not
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

try soaking with bolt off, its prolly the best stuff for loosening threads I have used, failing that, try some roids from the local fairfield dealer :lol: :lol: :lol: :finger:
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Can you set it up so that you can shock it free?
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

Post by 75 cruser »

the nut with the marks in it is left hand thread

rob
come on move over and let the 75 through
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

At this point your just cracking nuts. Leave the car on the ground untill you have them cracked.

18" shifter with a street sign on it :twisted:. Take up the weight then get a friend to sharply hit the head of the shifter with a 4pound hammer.

if you have the gear, hold the other nut by another shifter and take the weight with a floor jack.

or

take one off at a time and put it in a vice ;)

cheers smitty
innovation is better, better is faster, and fast is all that counts
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

hammey wrote:At this point your just cracking nuts. Leave the car on the ground untill you have them cracked.
problem is that 38/35s get in the way and i dont have anything smaller.
i set of 28s or something would be great but i dont have any
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 294
Joined: Tue Feb 03, 2004 8:59 pm
Location: sydney

Post by MUD80D »

j-top paj wrote:
Shadow wrote: the ones with the marks on the hex's Your not trying to turn this one the wrong way right?
nah definately got them going in the right direction... just dont have enough weight to crack them..



got a mate coming over in the morning that has a few KG on me so will see how we go :armsup:

get pete to help you
toyota 80#,d/cab ute chop,6" springs,20mm body lift, 315/75/16 muds, and 39" michelin XML play tyres , turbo 4.2 1HZ top mount intercooler diesel.now ENGINEERED.
Reece
Top
Posts: 99
Joined: Fri Jul 11, 2008 7:41 am
Location: MINTO

Post by wyliespatrol »

i have had to adjust mine a few times whan setting them up

same arms you have, and i live in west syd if you need a hand one arvo pm me
and will come help
Top
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

j-top paj wrote:just dont have enough weight to crack them..
Eat a few more cows...and be like me! (except you'll still be ugly, but some things cant be helped) :D
rick@offroadmediagroup.com.au
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

MUD80D wrote:

get pete to help you
he is, this arvo hopefully
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

j-top paj wrote:
MUD80D wrote:

get pete to help you
he is, this arvo hopefully
you have pm

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 43
Joined: Sat Feb 07, 2009 11:57 am
Location: gladstone

Post by hoppy's79 »

You could try hitting the nut head with a 4pound hammer and i don't just mean a tap give it a wack, this may help crack it and loosen the thread. If worse comes to you can heat it up this of couse will ruin your paint though
Ladncruiser 79 series.
turbo/intercooler
Coil conversion, 4 link setup
4" suspension lift, 2" body lift
Front & rear arb air lockers
35" maxxis mudzilla's.
Pro comp extreme alloy's
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

cracked them this arvo :armsup: :armsup: :armsup:

but i only moved them 10mm and i need 15mm so il have to do it all again tomorrow..

thank for all the input guys ;)
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest