Hi,
I have just bought some superior superflex arms for my GQ, I was just wondering, the pins that bolt into the chassis, how tight should they be.....i dont need a tourqe setting, just need to know whether i need to be swinging off the socket or not.
Cheers
Joel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fitting radius arms
I put the new arms in, went in without any hassles, whilst doing up the rear chassis mount bolts, there wasnt a great deal of tension on the nut so i kept going feeling how the bushes were every few turns, eventually the nut just stopped, being at the end of the thread i assume so i hope this is ok by doing this.
Who is online
Users browsing this forum: No registered users and 0 guests