Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
chev diesel into gu
chev diesel into gu
am looking to get a gu wagon for my next car, and after driving the father in laws cruiser with a 6.5 chev diesel in it, am pretty keen to do the same.
are the 4.2s,3.0s,2.8s all the same besides the donk, if so will then find a cheapo and put the chev in it.
has anyone done this willing to shed some light on the subject
cheers
are the 4.2s,3.0s,2.8s all the same besides the donk, if so will then find a cheapo and put the chev in it.
has anyone done this willing to shed some light on the subject
cheers
Re: chev diesel into gu
conversion is $23,000 drive in drive out when I was quoted 3 odd yrs ago. The g'box will need re-enforcingTHICKNICK wrote:am looking to get a gu wagon for my next car, and after driving the father in laws cruiser with a 6.5 chev diesel in it, am pretty keen to do the same.
are the 4.2s,3.0s,2.8s all the same besides the donk, if so will then find a cheapo and put the chev in it.
has anyone done this willing to shed some light on the subject
cheers
Think long and hard about it.
Also search for Duramax and Alison Auto on here.. MUCH MUCH MUCH better conversion....
Not too sure the Duramax fits in...? Could be mistaken, but I thought it was a little long.
I put the 6.5 into my GU. LOVE IT! Does cost a bit of coin to get it done by a shop (I used Brunswick Diesel). I would do it again, as they have given me good after sales service.
The gear box does not require any work. There are two options to fix the gearing to suit the Chev - either replace the 5th gear for a different ratio, or swap the diff centres out (front & rear). I went for the diff option, and Brunswick swapped them out for fully rebuilt units (the original rear diff on the ZD30 is a different size and you can't just do the diff centre, you need to replace the whole unit).
To do the conversion yourself, I would look at the 2.8 or 4.2 as the donor. There is less electrics to remove/bypass than the ZD30 (you still need the computer to do other things in the chassis/cab).
Did I mention I LOVE it?! A lot of coin though! $23k plus transport from Sydney to WA and back (the engine was blown, so that was my excuse for the missus).
I put the 6.5 into my GU. LOVE IT! Does cost a bit of coin to get it done by a shop (I used Brunswick Diesel). I would do it again, as they have given me good after sales service.
The gear box does not require any work. There are two options to fix the gearing to suit the Chev - either replace the 5th gear for a different ratio, or swap the diff centres out (front & rear). I went for the diff option, and Brunswick swapped them out for fully rebuilt units (the original rear diff on the ZD30 is a different size and you can't just do the diff centre, you need to replace the whole unit).
To do the conversion yourself, I would look at the 2.8 or 4.2 as the donor. There is less electrics to remove/bypass than the ZD30 (you still need the computer to do other things in the chassis/cab).
Did I mention I LOVE it?! A lot of coin though! $23k plus transport from Sydney to WA and back (the engine was blown, so that was my excuse for the missus).
2000 GU II, 6.5L Chev Diesel (ex ZD30), lift, bar+winch, rear bar, drawers, fuel tanks I need a personal loan to fill... most of the regular touring gear.
yes they will fit, Heath however has had quite a bit choped out of the firewall and re-plated behind it. Mainly to fit a 4" dump pipe and for better weight distribution.bogged wrote:it fits. Search as suggested.manno74 wrote:Not too sure the Duramax fits in...? Could be mistaken, but I thought it was a little long..
Heath has one in his runnin 12second 1/4's.
It will fit in a standard bay but will be tight.
Also would be more than $23000
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
HE is working out prices at moment.killalux wrote:yes they will fit, Heath however has had quite a bit choped out of the firewall and re-plated behind it. Mainly to fit a 4" dump pipe and for better weight distribution.bogged wrote:it fits. Search as suggested.manno74 wrote:Not too sure the Duramax fits in...? Could be mistaken, but I thought it was a little long..
Heath has one in his runnin 12second 1/4's.
It will fit in a standard bay but will be tight.
Also would be more than $23000
He has started a bit of a thread here.
http://www.patrol4x4.com/forum/showpost ... stcount=22
Go the brunswick,I did this conversion 15000 k ago,awesome difference.
12L/100k towing or not
$24000 drive in and out,my zd30 had a u/s fuel pump and they still gave me $4000 for it.
Diff pinions + ring gear changed to petrol ratio(3.9 I think).
1950rpm at 110kph.
2.8 G/Box is the only one not up to the task,3 + 4.2 box are the same and can handle it.
Hope this is helpful
Cheers
12L/100k towing or not
$24000 drive in and out,my zd30 had a u/s fuel pump and they still gave me $4000 for it.
Diff pinions + ring gear changed to petrol ratio(3.9 I think).
1950rpm at 110kph.
2.8 G/Box is the only one not up to the task,3 + 4.2 box are the same and can handle it.
Hope this is helpful
Cheers
2002 GU Wagon
6.5 chev diesel.
lifted 3'' front,4'' rear
1'' body lift.
adj panhards front + rear.
adj swaybar link pins.
35'' MTZ
Long range tanks.
twin swing away carrier.
3 x lightforce xgt.
6.5 chev diesel.
lifted 3'' front,4'' rear
1'' body lift.
adj panhards front + rear.
adj swaybar link pins.
35'' MTZ
Long range tanks.
twin swing away carrier.
3 x lightforce xgt.
Who is online
Users browsing this forum: No registered users and 15 guests