Hey all, after many hours of reading im going to go with a disco pototo turbo, just had one question tho, will it bolt straight up to a factory gu turbo manifold?? cant recall reading what its flange is
thanks heaps
oh yeah any one running one of this got any comments on it?? big or small rear housing,
ill be going the smaller one just for some extra punch while towing, not looking at doing any pump mods
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
DISCO POTATO TURBO
DISCO POTATO TURBO
Gu Ute td42t, dzltech turbo, front mount and aus4wd manifold, 18 x 10 rims and 36 15.5 mickey t's for bling
Just make sure the turbo clears the chassis rails when you use an adapter!
I have an aftermarket kit and the turbo sits pretty far forward compared to the factory manifold.
I had to cut a bit out of the engine mount to clear the intake of the turbo (3" intake). Just make sure you have enough space as the adapter moves the turbo approx. 1inch further out.
I have an aftermarket kit and the turbo sits pretty far forward compared to the factory manifold.
I had to cut a bit out of the engine mount to clear the intake of the turbo (3" intake). Just make sure you have enough space as the adapter moves the turbo approx. 1inch further out.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Who is online
Users browsing this forum: No registered users and 1 guest